Topic: Bios For Matrix Mod Chip (Read 75 times)

duff · « **on:** October 31, 2002, 10:23:00 AM »

You will need a bios to load like evox2.5.

My advice to you is to look around these forums for a while and check out the tutorials section: http://www.xbox-scen...m/tutorials.php

There is also a better flashing program than wmilk.exe, it is on the matrix main website.

WarM_FusioN · « **Reply #1 on:** October 31, 2002, 10:34:00 AM »

i believe it is called WinLPC... i think. whatever it is called it is on the easybuy site. i used it... pretty straight forward, it worked first time and i had no problems.

duff · « **Reply #2 on:** October 31, 2002, 10:36:00 AM »

QUOTE (demarad @ Oct 31 2002, 05:27 PM)

A better flashing program? What is it called? What is the main site for the matrix mod chip? I think I was on it but I can't find the flashing program.

Is the wmilk the actual program...similar to evox 2.5?

Thanks,
DEMARAD

Here is the Matrix official site:
http://www.xodus-chip.com/
Go to the 'Downloads' section to find the new flashing program (windows based)

Wmilk is only a program that will flash the chip with a bios (put the bios onto the chip) You still need a bios like evox2.5

There is even more, you will probally want to (but don't have to) install evolution-x on your Xbox's hard drive which will make buying a matrix (or any other mod chip) much more worthwhile.

You can get all this information by looking around these forums for a while and check out the tutorials section.

duff · « **Reply #3 on:** October 31, 2002, 10:41:00 AM »

QUOTE (demarad @ Oct 31 2002, 05:38 PM)

When I use the winlpc.exe file, I just double click and follow instructions?

Do you have a bios yet (evox2.5)?

DaGamePimp · « **Reply #4 on:** October 31, 2002, 10:44:00 AM »

There are full instructions on the MATRIX website and there is a downloadable version on the EasyBuy site . Follow those instructions and you should be good to go .
--- DGP ---

duff · « **Reply #5 on:** October 31, 2002, 10:58:00 AM »

QUOTE (demarad @ Oct 31 2002, 05:49 PM)

Ok, I found the manual to install the chip. I have the wmilk file. I guess that loads the bios on the chip.

I followed the instructions above and went to the xodus-chip.com site and found a download file called WinLPC.exe. Is this the evox 2.5.

No, you are looking for a file called evox25.bin that is your bios. The WinLPC.exe will only put evox25.bin on the chip.

demarad · « **Reply #6 on:** October 31, 2002, 02:03:00 PM »

OK, THANKS FOR ALL IN THE INFO SO FAR GUYS. I APPRECIATE IT ALL.

Regards,
DEMARAD

Author Topic: Bios For Matrix Mod Chip (Read 75 times)