xboxscene.org forums

Author Topic: Not Booting Into Modchip  (Read 157 times)

Heimdall

  • Archived User
  • Hero Member
  • *
  • Posts: 3862
Not Booting Into Modchip
« on: August 25, 2010, 02:11:00 AM »
Check your soldering, especially the D0 wire. Try manually grounding D0 on the motherboard then booting, to see if your Xbox boots from the chip. If it doesn't then your chip is broken.
Logged

haychis

  • Archived User
  • Newbie
  • *
  • Posts: 7
Not Booting Into Modchip
« Reply #1 on: September 08, 2010, 07:25:00 PM »
SOLVED.

Unsoldered the little board (that u need for 1.6 xbox's) under the motherboard, and physically soldered wire to each point per wiring diagram. Think there was six. Then plugged in the original duox3 mod chip. BT soldered to ground so it boots straight into chip, cause there's no need to boot into stock dash anymore. It worked. So I'd say probably a problem with that little board, solder joint or something maybe. Anyways, gonna leave it as is, it works.

Thanks for your help.
Logged