Topic: Duo X3 Chip (switch In The Middle Of The Board) (Read 146 times)

Mjollnir · « **on:** August 24, 2009, 03:44:00 AM »

Duo X3 is a clone, it has 2x256 kb and is preloaded with M8+ bios

works fine if u dont want to fiddle too much, bank 1 is for 1.0 to 1.5 and bank 2 is for 1.6.. its printed on the PCB.

Joes2Silly · « **Reply #1 on:** August 26, 2009, 08:52:00 PM »

You should be able to run XBMC on it. Just plop it onto the LPC header (don't use the quick-solder pads, trust me) and wire up the leads. If you need help wiring the leads either look at the Duo X2 diagrams or the old Aladin diagrams, both should work

bc54 · « **Reply #2 on:** August 26, 2009, 09:06:00 PM »

you should avoid buying a clone at all costs.

you can get legit duox2 gs white (linux) version chips from litspliff in the bst forums. he has been here forever and he has probably the best prices on the net.

good luck.

Joes2Silly · « **Reply #3 on:** August 27, 2009, 06:18:00 AM »

I totally agree, but if for some reason he already has one, he should just go ahead and install it

ethernet · « **Reply #4 on:** September 09, 2009, 08:02:00 PM »

What is the best way to reinstall the programs. The chip lost its Flash and the Hard drive is locked. When you use the power button the bios chip lights for a second then goes out and the program names are there no files. The ms bios is working the system works it has a upgrade 320 gig hd.
What would be the best way to reinstall what programs or is there a DVD avalible to buy or download for this chip.

What is the best way to reinstall the programs. The chip lost its Flash and the Hard drive is locked. When you use the power button the bios chip lights for a second then goes out and the program names are there no files. The ms bios is working the system works it has a upgrade 320 gig hd.
What would be the best way to reinstall what programs or is there a DVD avalible to buy or download for this chip.

Author Topic: Duo X3 Chip (switch In The Middle Of The Board) (Read 146 times)