xboxscene.org forums

Author Topic: I Ripped A Pulse Chip And Need To Flash It  (Read 34 times)

BlackFoxx

  • Archived User
  • Newbie
  • *
  • Posts: 33
I Ripped A Pulse Chip And Need To Flash It
« on: February 18, 2006, 11:52:00 AM »
I'm not going to go buy a modchip, but need to put in a new harddrive, so I ripped a bios chip from my old computer and was wondering if it could possibly hold a bios for my xbox, and how would I flash it?
Logged

JrracinFan8

  • Archived User
  • Sr. Member
  • *
  • Posts: 278
I Ripped A Pulse Chip And Need To Flash It
« Reply #1 on: February 18, 2006, 12:14:00 PM »
Put it back in the motherboard obviously boot it into dos and use uniflash to flash the Xbox bios to the chip. But remember it matters what brand/model flashrom chip it is and has to be 120ns or lower.

PS A little hint have a backup of your existing chip handy with the current PC bios on it just so you can reflash your xbox chip for future upgrades (and also if you fuxor something).

This post has been edited by JrracinFan8: Feb 18 2006, 08:18 PM
Logged

BlackFoxx

  • Archived User
  • Newbie
  • *
  • Posts: 33
I Ripped A Pulse Chip And Need To Flash It
« Reply #2 on: February 18, 2006, 11:40:00 AM »
QUOTE(JrracinFan8 @ Feb 18 2006, 07:45 PM) View Post

Put it back in the motherboard obviously boot it into dos and use uniflash to flash the Xbox bios to the chip. But remember it matters what brand/model flashrom chip it is and has to be 120ns or lower.

oh, well I ripped it from a dead computer, tyoo bad
Logged