xboxscene.org forums

Author Topic: L1 And Bt  (Read 38 times)

parkhill456

  • Archived User
  • Newbie
  • *
  • Posts: 3
L1 And Bt
« on: December 12, 2004, 11:45:00 AM »
i destroyed my L1 and bt  resistors on my 1.0 xbox i have an aladdin xt4064  can sombody tell me how to install the chip in the always on mode and what pin headers do i need
Logged

Actual

  • Archived User
  • Newbie
  • *
  • Posts: 4
L1 And Bt
« Reply #1 on: December 12, 2004, 11:53:00 AM »
pretty straightforward.

1. Link BT on the Aladdin to Ground
2. Link D0 from motherboard to ground
3 (optional) link 'X' to D0 on the Aladdin

Worked for me, even on a 1.6b
Logged

aladdin64

  • Archived User
  • Newbie
  • *
  • Posts: 49
L1 And Bt
« Reply #2 on: December 12, 2004, 11:56:00 AM »
ground out d0 and the chip is always on.. but you still gonna need those resistors so you better find new ones..

Regards
Logged

ckh2004

  • Archived User
  • Full Member
  • *
  • Posts: 178
L1 And Bt
« Reply #3 on: December 12, 2004, 04:20:00 PM »
QUOTE
2. Link D0 from motherboard to ground


Permanently ground LFRAME (D0) for v1.6/1.6b will cause long term damage to the mb. It is better to cut the top LFRAME trace on the mb. Connect D0 to ground is more for v1.0-1.5. Refer to the following thread for details:

http://forums.xbox-scene.com/index.php?showtopic=309169
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
L1 And Bt
« Reply #4 on: December 12, 2004, 05:08:00 PM »
If you don't fit R3G3 back in the box will not work from the power button
10K SMD resistor is what you want.

This post has been edited by Chancer: Dec 13 2004, 01:08 AM
Logged