Print

[anu|b|iss]

If you burned/broke off the gold connector pads on your aladdin, then it can still be fixed.

The fix is simple, you can either follow the traces leading from the pad that's broken and solder a wire to the nearest via and attach the other end to the LPC where the pad normally goes. This can be done for all the pads except for one to my knowledge since the trace for it goes direct the the lattice chip, in that case you have to solder a wire to one of the exposed pins on the chip.

If you can't do it yourself I would be glad to rewire your chip for you, just contact me via e-mail.
I will wire it and color code your wires and include a diagram.