xboxscene.org forums

Author Topic: 2.2pro W/pogo Pins..............?  (Read 44 times)

scarab23

  • Archived User
  • Newbie
  • *
  • Posts: 4
2.2pro W/pogo Pins..............?
« on: August 28, 2003, 07:36:00 PM »

Hello, all. Unfortunatley I ended up here do to a problem, but I have found lots of interesting info so i'll be sticking around.

Here is my current dilema:

Installed Pogo Pin adapter with no apperant problems
Assembled and installed the chip etc... w/external programer
Fire it up with the 4 switch on (others off) and the chip disabled
All procedes as directed using the Bios Manger, get verification and chip programed and ready window.
so I power down the Xbox, and reset my dips witht he hip enabled.
The system fires up I get the flubber screen and then the xbox logo screen with nothing under it, it idles for a few secs and then it frags with an error message on the screen saying "Your xbox need service, contact MS...." and an error 07 in the upper left corner. Which I believe is HDD Time out.

So what gives?? I checked everything and found no physical instalation probs.

Any help would be greatly appreciated.

Logged

scarab23

  • Archived User
  • Newbie
  • *
  • Posts: 4
2.2pro W/pogo Pins..............?
« Reply #1 on: August 28, 2003, 07:59:00 PM »

Just in case..................the xbox works just fine with the chip disabled.
Logged

scarab23

  • Archived User
  • Newbie
  • *
  • Posts: 4
2.2pro W/pogo Pins..............?
« Reply #2 on: August 30, 2003, 09:19:00 AM »

Just wanted to post a quick thanks to the site in general, even though nobody could help, even tech support was baffled, I'ts ok.

I spent alot of time checking different threads and problems and did find the "cure" for my problem. beerchug.gif

In that time i realized the unbalievable amount of information available here.

So I just wanted to say thanks. biggrin.gif
Logged