Topic: 3 Boots And Flashes. Im Am Lost. (Read 37 times)

LiL_J · « **on:** March 06, 2003, 06:57:00 AM »

I have been working on this homebrew for a long time and every time it is the same thing. When ever I have the "Link to point 32 on Mb" (IMG:http://www.xbox-scene.com/imageserver/ownmod/eprommod4xs.jpg) (As seen here) connected, the xbox just boots three times and gives me error lights. This is driving me nuts. I am useing a Xtender 1.1 Bios ona Xbox V1.0, and a 27C040 100ns eprom. I am almost possitive the solder joints are good. I have been working on this for months and I am now at a loss. Thanks for any help that can be given.

LiL_J · « **Reply #1 on:** March 07, 2003, 12:15:00 PM »

Bump

LiL_J · « **Reply #2 on:** March 10, 2003, 01:24:00 AM »

Bump again

3tlk · « **Reply #3 on:** March 10, 2003, 09:19:00 AM »

That link disable the onboard BIOS so that is normal. If you unlink and it works it normally means one of your points isn't soldered in well. If you have a multi-meter do a continuity test between the socket and TSOP. For the point that does give continuity you will need to resolder.

LiL_J · « **Reply #4 on:** March 13, 2003, 11:53:00 AM »

Hey man. Thanks alot. With you info i got it working. I tested all the points and I found that I have a bad wire. I want to thank you alot.

Author Topic: 3 Boots And Flashes. Im Am Lost. (Read 37 times)