Topic: Any Pictures Of A Modded Xbox W/ A Disable Switch? (Read 50 times)

[oMega] · « **on:** July 28, 2002, 08:57:00 AM »

Homebrew Mod with Switch

and here is a pic of how the switch looks from the outside!

user posted image

Hope this helps out.

When using X-ecuter just put the switch in the only wire it has... when using the other chips, refer to online guides

Nigma · « **Reply #1 on:** July 28, 2002, 09:59:00 AM »

Check out my Mod Pics: http://imagepop.com/xbox.htm.

[oMega] · « **Reply #2 on:** July 28, 2002, 12:56:00 PM »

I just have a question.

Did u have a hard time sorting out the wires and soldering them each into its corresponding place?

They are all the same color and it seems a bit hard

U are set up for today and the future

Kalakov · « **Reply #3 on:** July 28, 2002, 04:46:00 PM »

limbfilter · « **Reply #4 on:** July 28, 2002, 05:20:00 PM »

For turning off the modchip. There is a big scare as to what might happen with xbox online. That's the reason.

Entimann · « **Reply #5 on:** July 29, 2002, 05:27:00 PM »

what if i flash my bios and take the modchip out. can anything happen with xbox live?

[oMega] · « **Reply #6 on:** July 29, 2002, 07:00:00 PM »

Nothing has been said, but most probably YES.

Ms service could detect the modified bios easily.

kingkornkarn · « **Reply #7 on:** July 29, 2002, 09:51:00 PM »

The ZIF socket is a nice touch.

BenJeremy · « **Reply #8 on:** July 29, 2002, 10:12:00 PM »

QUOTE (limbfilter @ Jul 29 2002, 10:51 PM)

right...It's not the modchip that they could detect, it's the bios. But how many of you guys are going to use xbox live?

Easy... switch back in the original BIOS "on the fly"

All that's involved is the chip enable or an address line or two.

Actually, what some should be more worried about is M$ finding software on the hard drive that doesn't belong there.

Say Buh-bye to EvoX dashboard when M$ gets around to writing a little routine to check for it.

Nigma · « **Reply #9 on:** July 31, 2002, 06:48:00 AM »

[oMega] the trick is to use a meter to find the correct wire and possible have someone else help at that. I touched one point on the mobo where we connected the wire, then my helper who was soldering the wires to the ZIF went through them all until it beeped.

It was tedious, but it worked.

[oMega] · « **Reply #10 on:** July 31, 2002, 09:05:00 AM »

Nice work thou!

Technics · « **Reply #11 on:** August 01, 2002, 11:40:00 PM »

Author Topic: Any Pictures Of A Modded Xbox W/ A Disable Switch? (Read 50 times)