Topic: My Last Question Topic (Read 70 times)

Dark Seeker · « **on:** June 06, 2008, 11:34:00 AM »

Ok i want to integrate a logitech controller into my xbox (with my communicator) the problem is i have to "Fix"my mike alot (unplug it and plug it back in) so where can i put this so i dont have to open my xbox 24/7 i was thinking about putting it on the back (also how good of a signal will i receive with an integrated controller/mic?

lostboyz · « **Reply #1 on:** June 06, 2008, 03:34:00 PM »

That seems like quite a bit of work to mold in the mem card slot.

I suppose the back or the left side underneath the dvd drive would be a good spot.

I assume you have a wireless headset?

Dark Seeker · « **Reply #2 on:** June 06, 2008, 06:20:00 PM »

Infamous Ob · « **Reply #3 on:** June 06, 2008, 08:05:00 PM »

It can be done, but you just have to work at it. Do you have a Dremel and a Hot Glue Gun?

Dark Seeker · « **Reply #4 on:** June 06, 2008, 09:52:00 PM »

Heck Ya!

metalmaster06 · « **Reply #5 on:** June 07, 2008, 01:40:00 AM »

Dark Seeker, PM me with some photos of this mod when you're done.

I've been thinking about doing this for a while. My idea was to shrink the components as much as possible and then mount them just behind the faceplate. I was also thinking about integrating the mem card slots into the front panel toward the sides mounted veritcally. Not deep slots but maybe a quarter inch deep before the connectors. I'm hesitating cause I don't want to hack up my blue XCM front panel. I have a red one coming and an crystal x3 cp to paint to match it, so maybe I'll hold off until I have some more case options.

Could always hack my spare stock case

Dark Seeker · « **Reply #6 on:** June 10, 2008, 12:17:00 AM »

hmmm i looked at my xbox and its too crammed *sob* so any more ideas?
done so far:
hdd&lan led
80mm led fan
custom jewel
usb 2 port
dvd window (lined with el wire)
xbmc mc360
jewel leds
cpntroller port leds
eject led

Infamous Ob · « **Reply #7 on:** June 10, 2008, 12:34:00 AM »

QUOTE(Dark Seeker @ Jun 10 2008, 01:53 AM)

hmmm i looked at my xbox and its too crammed *sob* so any more ideas?

Im gone tell you like I told another guy: Just go back deep into the old Threads and Pages of the "Xbox Case/Hardware modding" section and just research and look at the Xbox's for ideas. That's how I come up with ideas....

Dark Seeker · « **Reply #8 on:** June 10, 2008, 10:09:00 AM »

QUOTE(NiC_CC @ Jun 10 2008, 03:10 AM)

Well how about after you cut away some of the stock hard drive mount? Would that clear out enough room or would it be still too cluttered? I would recommend removing the metal 'shield' on the top and surrounding area if you plan on putting it internally.

hmm never though of that (i will try it but it will take me a while)

Author Topic: My Last Question Topic (Read 70 times)