I have yet again changed the positioning of every componant. This is the final position/layout for everything, I will have pics up as soon as I can get some batteries for my camera.
But one problem, I am going to have to solder extensions for ALOT of wires.
-Dvd Power wires
-4 controller port wires
-Power/eject pcb wires
-possibly all 12 psu to mobo wires
and MOST painfully...
-The Audio Video connector wires.
For the AV connector, I am going to have to desolder the entire connecter from all 22 points and the 2 that hold it on, then solder 18" extension wires to the mobo for all 22 wires that will be soldered to the corresponding points on the av connector. That is going to be the huge pain in the ass...
Is there any other solution to this?
For the ethernet port, I am going to just plug in an 18" ethernet cable to a black coupler, and use that as the port on the side set flush with the side of the box in its little perfectly dremel cut hole
And the power cable will just be plugged inside of the case to the mobo then out a hole. So the cable is always connected, like an amp's power cord.
-Danny