Topic: Super Monkey Ball Cant Play Back Up? (Read 438 times)

bigga · « **Reply #15 on:** March 19, 2005, 08:14:00 AM »

CODE

Section "Games"
{
AutoAddItem "e:\games\"
AutoAddItem "f:\games\"
AutoAddItem "f:\hddloader\"
Item "Super MonkeyBall Deluxe","f:\Games\SuperMonkeyBallDX\default1.xbe",ID_Reg_NA

Add the underlined line into your evox.ini to force the game to always launch as USA region, without changing the settings each time.
I also renamed xbe to default1.xbe to get round the evox xbe autoscan, as the game would then be listed twice. You could always just leave it as default.xbe and move the game to a different location.
Just change f:\games etc to where ever your monkeyball is stored

EDIT can't get formatting to work. Add in the line that starts with item and ends with ID_Reg_NA

This post has been edited by bigga: Mar 19 2005, 04:20 PM

zero129 · « **Reply #16 on:** March 19, 2005, 03:15:00 PM »

I'm having problems with this game too, i changed my settings in unleash x to ntsc-m, and the video mode to auto, but whenever i start the game it just goes back to the unleashx menui

, anyone know what the problem might be?.

BTW my xbox is a pal 1.6.

Mentalpiracy · « **Reply #17 on:** March 19, 2005, 05:15:00 PM »

Yeah, I am having the same problems...
I have tried all the combinations of screen settings (letterbox, normal) and video modes (auto, default etc.) and I either get a black screen or sent back to the dashboard.

(My XBox is set to NTSC as it is usually in progressive scan mode).

anticrap1234 · « **Reply #18 on:** March 19, 2005, 07:59:00 PM »

this is just one of those games that wont work off hdd this and fight club are the 2 i own and im not about to get the illegal crak for fight club. if anyone gets a fix for this monkeyball game for a ntsc counsel pm me

doojit · « **Reply #19 on:** March 19, 2005, 09:55:00 PM »

I had same problem in config magic set to region 1 runs sweet as a nut of the hdrive. Put it on their with dvd 2 xbox , Also have xbox set to ntsc runs everthing though even pal

kingroach · « **Reply #20 on:** March 19, 2005, 09:25:00 PM »

just wait few days for a HD fix.. I have burned the game and got it working in my NTSC box with 16:9 and x2.4981 bios..btw.. I didnt change any settings..

zero129 · « **Reply #21 on:** March 20, 2005, 07:29:00 AM »

Well heres something strange, i have 2 xbox's a v1.1, and a crystal v1.6 xbox.
Both xbox's have the exact same soft mod installed, the exact same dash, and the exact same bios.

I also have both xbox's set up the exact same.

On my v1.6 xbox when i go to run the game from hdd it just resets back to the dash, but on my v1.1 it runs perfect from the hdd.
So it leads me to believe that maybe its something got to do with newer xbox's?, or why else would it run on my v1.1 and not on my v1.6?.

Sc0rpion · « **Reply #22 on:** March 20, 2005, 07:42:00 AM »

Had the same prob old box upstairs was fine new 1.6 box downstairs no go, setting evox up using the settings below on my 1.6 sorted it. works from hdd as well.

but no matter what i try unleashx wont boot it for me.

EvoX 3935
----------
Region = PAL
Game Region = AUTO
TSR = NORMAL

& Save The Changes

M$ Dashboard
--------------
Video = NORMAL (wont work in widescreen mode)

boot game from DVD or HDD using EvoX dashboard.

zero129 · « **Reply #23 on:** March 20, 2005, 12:41:00 PM »

Thanks Sc0rpion, ill try that out later on today.

marktravisuk · « **Reply #24 on:** March 21, 2005, 01:23:00 PM »

Hi All,

Had the same problems with game returning to dash.

I am running V1.6 Xbox, Xecuter 3 - V3029 and Team UIX Dash.

I tried a program called Enigma Video Switch, changed setting to NTSC and exited program using both triggers and white button to return to dash.
I can play monkey ball now either from DVD or HDD without any problems.

Works with setting on widescreen, letterbox and normal with PAL60 enabled or disabled.

Hope this helps.

This post has been edited by marktravisuk: Mar 21 2005, 09:27 PM

burnerO · « **Reply #25 on:** March 21, 2005, 06:10:00 PM »

It seems that PAL users are having better luck with this one than the NTSC kiddos.

This is pretty random (believe me I was frustrated), but the way I was finally able to get this working on an NTSC box was to run the Enigmah Video Mode disc, switch the display to PAL, reset, and run it again and set it to NTSC and reset. For whatever reason it started working after that. :huh:

sheliak · « **Reply #26 on:** March 21, 2005, 07:10:00 PM »

I used Complex Tools, worked fine. If dvd2xbox doesn't do the job, Complex Tools always saves the day. Between the two I have not ran into a game I could not backup.

anticrap1234 · « **Reply #27 on:** March 21, 2005, 07:30:00 PM »

i hav a ntsc xbox i bought in the us and i hav the ntsc game it wont play off hdd but i put i on a dvd+r and it runs off backup. my origional disk got murdered by mountain dew the day i got it

GCG49 · « **Reply #28 on:** March 21, 2005, 10:44:00 PM »

Sorry if this is a noobish Q-

Will it work off of a burnt DVD-R or is it not just a problem with HDDs? Thanks.

burnerO · « **Reply #29 on:** March 21, 2005, 11:38:00 PM »

Mine wouldn't work on my NTSC box under either circumstance until doing what I described above.

anticrap1234, did you try my steps?

Author Topic: Super Monkey Ball Cant Play Back Up? (Read 438 times)