Topic: Oh No, Wtf Is Wrong Now? (Read 256 times)

msn25 · « **on:** July 27, 2003, 08:43:00 AM »

lol...

its ur xbox fragging...

whatd u do when you opened it? did you install a mod chip?

msn25 · « **Reply #1 on:** July 27, 2003, 09:20:00 AM »

well...ur not screwed...but since im assuming you didnt install it yourself...u might be screwed...

what has happened apparently, one of your wires has come loose, either one of the LPC points or the d0.

what you can do is look over the LPC area and check to see if a LPC looks shady or not ALL the way connected...you can also use a multimeter if you have one and check the continuity of each point to see if it has connectivity...if you find it...get a soldering iron and resolder that point...

but if you dont want to do any of this...my suggestion is to either find someone to "fix" the LPC area or talk to the one who installed it in the first place and complain that he did a shady job...

where you located?

Intelligoth · « **Reply #2 on:** July 27, 2003, 10:42:00 AM »

QUOTE (MoDeM @ Jul 27 2003, 09:24 AM)

florida, but wouldnt like a piece of electrical tape hold that wire...

I wouldn't recommend it. Electrical tape can come loose when it gets hot, and the Xbox internals can get in the 50 degree C range. Soldering is the best option. I agree with MSN25, your system probably has a shoddy soldering job or loose wiring. I'd offer to fix it for you, it sounds pretty easy to diagnose, but I'm not in Florida.

msn25 · « **Reply #3 on:** July 27, 2003, 11:16:00 AM »

good luck bro

MoDeM · « **Reply #4 on:** July 27, 2003, 02:52:00 PM »

what kind of problems do you get?
If i detach the mod chip, will my xbox start to boot up correctly? need to know this, dont want to lose my xbox!

MoDeM · « **Reply #5 on:** July 27, 2003, 04:53:00 PM »

*Bump* Come one peeps, will it work or not?

EvilWays · « **Reply #6 on:** July 27, 2003, 08:46:00 PM »

QUOTE (ltb8 @ Jul 27 2003, 08:20 PM)

hey just my opinion but i highly recommend not getting the matrix........ too many probs with it....

Yeah, what probs? Other than making sure not to bump it (causing it to unalign) and only 256K of flash memory, I haven't had a problem.

aweirdguy · « **Reply #7 on:** July 28, 2003, 09:22:00 AM »

If you take the old modchip out, your xbox will work like a normal unmodded box, assuming that your hard drive is locked.

The matrix chip isnt all bad, but they're touchy. My friend has one and everytime he takes it somewhere it shakes itself out of alignment. He hates it, is getting sick of opening the box to re-align it all the time, and the screw hole is starting to strip.... last I heard he's saving up $$ to buy a chip with wires.

Your best bet is to find someone local that knows how to solder. It should be free, or darn close to it to have someone re-solder your 2 loose wires.

MoDeM · « **Reply #8 on:** July 28, 2003, 10:19:00 AM »

what if my hd isnt locked? could i boot up with an evox boot cd, then use config magic to lock it? would that work at all?

MoDeM · « **Reply #9 on:** July 28, 2003, 10:26:00 AM »

ok, but in order to lock my hd, would it read the cd-rw(my evox boot disc) and allow me to get to config magic and lock the hd, or do is all i have to do is set my time?

SkiLLz2g2 · « **Reply #10 on:** July 28, 2003, 10:28:00 AM »

well im having problems with my new hd and evox cd so i cant answer that.. sorry

MoDeM · « **Reply #11 on:** July 28, 2003, 10:29:00 AM »

okay then, so if im able to get to the msdash, would it let me play Retail bought games though? or do i HAVE to lock the hd first?

SkiLLz2g2 · « **Reply #12 on:** July 28, 2003, 10:32:00 AM »

i dont think you need to have the hd locked but can you reach to msdash?

MoDeM · « **Reply #13 on:** July 28, 2003, 10:32:00 AM »

gimme a sec to get rid of modchip and try it/

SkiLLz2g2 · « **Reply #14 on:** July 28, 2003, 10:36:00 AM »

im pretty sure it should work

Author Topic: Oh No, Wtf Is Wrong Now? (Read 256 times)