Topic: No Video Signal (help Needed) (Read 396 times)

Whatup1049 · « **Reply #15 on:** July 24, 2003, 07:07:00 AM »

) then XBMP will still be FUBARED up cause it has corrupted settings in that folder I mentioned earlier in a previous posts. Delete all the crap in thata and then it should work just dandy! Just DONT tocuh that stupid new setting in there!

tsjarlie · « **Reply #16 on:** July 28, 2003, 06:25:00 AM »

fMark,

Last night I got the same problem, played around in xbmp, looked a movie (chocolat, great movie), restarted the xbox this morning : only sound, no video,
probably the same problem as here, can you send me the NTSC.PAL.Video.Mode selector iso ? Or tell me were to get it ?
I have a PAL TV, do I also need to press B when booting, you can mail me at
[email protected]

madthumbs · « **Reply #17 on:** July 29, 2003, 09:21:00 AM »

Is this the same file as; video_select_v2_enigmah-x.rar ? *edit -this worked!

t3knophile · « **Reply #18 on:** August 01, 2003, 08:11:00 PM »

well, add me to the list of stupid people who set their xbox to NTSC-J.
Thanks sooo much, this fix worked like a charm. I'm keeping that DVD-RW around handy! ;p

LayLoMo128 · « **Reply #19 on:** August 13, 2003, 03:37:00 AM »

I screwed up and did pretty much the exact same thing. Well, the problem now is, I used the 007/Phoenix Loader Exploit to get Evox and XBMP into my XBox. After I played with the settings, only sound and no video. So I thought I would replace the files, didn't work. Changed it back to my MS Dashboard, Sooo, now it loads up my MS Dash (still sound only) and i can't FTP it or anything. (I put it back to MS Dash hoping it would fix the problem, guess not)

I got that XBOX.NTSC.PAL.Video.Mode.Selector.Version2 and burnt it on CDRW. Put it in my xbox, waited and press B. Off/On Xbox.. same thing (sound, no video). I was wondering if my XBox could read CDRW originally or am i screwed? Plz, any insight.

Harry Paratestes · « **Reply #20 on:** August 13, 2003, 04:38:00 AM »

If burned properly I believe that most Xbox's will read CDRW.

siniik · « **Reply #21 on:** September 01, 2003, 02:52:00 PM »

Can someone send me the file so I can burn it? I think i might have made the same mistake.

send the file to [email protected].

thanks.

spgurley · « **Reply #22 on:** September 01, 2003, 04:25:00 PM »

hey i'ld liek it incase anyoe asks me for help having the same problem on mirc, or aim, or this, or incase i have the same problem, but just incase. So could u please send it to me at [email protected]

XboX-ZERO · « **Reply #23 on:** September 05, 2003, 09:52:00 PM »

QUOTE (fMark @ Jul 23 2003, 09:00 PM)

Ok ! I just fixed it.
I made a XBOX bootable disk with "XBOX.NTSC.PAL.Video.Mode.Selector.Version2" application. Then boot my XBOX with this CD and press button B on controller. Then turned off and on XBOX and everithing is fine now !!!
Thanks to everyone for help.
2 Prof : let me know if you need this programm. Good luck.

Thank You So Much.

mkollek · « **Reply #24 on:** September 16, 2003, 09:34:00 AM »

WoW i wished i would have been in this technical forum more often cuz i just did the same thing. But I got it back with Video selector program. I transfered all the apps from the xbox to compuiter and put only the video selector on the xbox. So I knew how to navigate to the apps folder in evox and the only app there was the right app so that was no problem. I pressed B and restarted xbox.. and it works like usual now. THANKS GUYS!!!!

LayLoMo128 · « **Reply #25 on:** September 24, 2003, 12:33:00 AM »

LOL, i'm still screwed. I tried burning it. Okay, first off my xbox's not modded. I have a Thomson Drive (checked by looking at the tray, one of the pinned threads) well, the CDRW doesn't even work w/ my bro's modded Xbox, Thomson Drive also. I used a HP CD-RW as the media. It's been sitting there for the pass 2 months.. (no time either to fiddle w/ it..) but.. can anyone help me?.. or give me some leads?. I don't wanna have to mod it yet.. and if i did, dunno if it'll work (since the CD didn't work on my bro's Xbox).. <sigh>.. i'll be checking back .. thanx..

eyric101 · « **Reply #26 on:** September 24, 2003, 10:18:00 AM »

If your xbox isn't modded unless you are running the software exploit (either font or audio) your cd isn't going to boot. The best way around this that i can think of is audio sign the video select xbe file and drop it in the mech save game. Good luck with that

zyprexa · « **Reply #27 on:** September 25, 2003, 11:46:00 AM »

HELP!

I think I sufferred a 1-2 punch. If anyone help can help, please respond.

I suffered the dropped video problem as I was friggin' with XBMP to get aspect ratio's correct. The box would boot, I could hear sounds but no video. The NTSC/PAL selector would have helped here.

Life would have been simple had I checked the boards before I did what I did, but, I opted to disconnect my Matrix chip on my XBOX v1.0 and hope that all things would reset - it didn't, but when I try to turn on my box now, not only have I lost video (still get the sound the xbox turning on), but I also get a red/green flashing light on the outside display. My matrix chip appears to be running fine.

I even reinstalled the original unmodified hard drive and took out the matrix chip to no avail.

EDIT: Figured it out!!! Thank god...essentially had to reflash the chip and reinstall it and the do the video switch program. Thanks for the info..

Does anyone know if this if fixed in future XBMP releases?

Am I screwed or what?

I once had a red/green flashing light problem and had to change the IDE cable. I went and put a brand new IDE cable adapter - no improvement.

Any ideas? I don't want to spend another buck-50 for a new box. Thanks.

zyp

Enzomatrx · « **Reply #28 on:** September 25, 2003, 04:52:00 PM »

wanna just add my thanks too!
you would figure buying an XBox in Japan and using it on a Japanese TV would mean you could set it to NTSC-J?
Nope!
thanks for the file, worked like a charm!

Jesper64 · « **Reply #29 on:** September 28, 2003, 11:38:00 AM »

Thank god for this thread. I can now actually go to sleep rather than worry about why my xbox had no video.

Author Topic: No Video Signal (help Needed) (Read 396 times)