Topic: No Video Output With Duo X2 Chip (Read 72 times)

hangover · « **on:** August 04, 2009, 05:53:00 AM »

I recently bought a couple of xbox's to build a slimbox media centre , i case already cut down and another complete to swap the guts over. I was told by the seller that it possibly had a bad bios flash but now that i have dis assembled it i find it has been chipped. When i boot using the eject button i get a blue screen then an error 6 message, booting with the power button i get no video at all. I tried switching the chip switch but it didnt seem to change anything, just wondering where to go from here to restore video output ?

event horizon · « **Reply #1 on:** August 04, 2009, 06:56:00 AM »

The easiest solution would be to just install a new clean Duo X2. The chip switch is for bank0 and bank1, if both are messed up then it's best just to get a new modchip.

But before you do check if all the connections are solid, specially the d0.

hangover · « **Reply #2 on:** August 04, 2009, 07:03:00 AM »

QUOTE(event horizon @ Aug 4 2009, 10:56 PM)

The easiest solution would be to just install a new clean Duo X2. The chip switch is for bank0 and bank1, if both are messed up then it's best just to get a new modchip.
But before you do check if all the connections are solid, specially the d0.

I know nothing about modchips so it mat be the easiest solution, do they come preflashed or will i need to flash it myself ?

event horizon · « **Reply #3 on:** August 04, 2009, 08:04:00 AM »

QUOTE(hangover @ Aug 4 2009, 02:03 PM)

I know nothing about modchips so it mat be the easiest solution, do they come preflashed or will i need to flash it myself ?

The Duo X2 GS Cromwell comes with Flashbios on one bank and on bank0 is a Linux cromwell bios, I flashed both with different bios. The blue Duo X 2 comes with M8 and Flashbios as far as I know.

This is a good guide:
http://hackdabox.ete...x2_Install.html

http://hackdabox.ete...2_Flashing.html

Author Topic: No Video Output With Duo X2 Chip (Read 72 times)