xboxscene.org forums

Author Topic: Component Conversion  (Read 59 times)

smoke_screen_uk

  • Archived User
  • Newbie
  • *
  • Posts: 23
Component Conversion
« on: February 19, 2008, 10:16:00 AM »
Yeah it is possible, you just need to open up the plug on the xbox cable and desolder all the wires and then cut the plug off the xbox 360 component cable and strip back the outer insulation to give enough length on the signal wires (about the same amount as the original xbox AV cable had) and then soder the relivent wires to the contacts in the plug.

I've provided a pinout of the XBOX AVIP plug below that should help with the wiring.

For High Definition you need to connect pin 11 and 13 to ground.

IPB Image
Logged