Print

[jinn]

I'm going to start to make my VGA cable just have a few ?s

Can I add both RCA audio and Digital Coax (RCA) or just one?

If it can be done, does anyone know what points I have to solder for Digital Coax (RCA) audio on the adapter?

[FrostyTheSnowman]

Yes, you can use both Analog and Digital audio on the same cable. Just keep in mind that you will need a Dolby Digital 5.1 decoder to use Digital Audio.

Digital Audio Pinout: Pin 6 goes to the center pin on the RCA connector, Ground goes to the outside pin on the RCA connector.

EDIT: Here is a pinout chart that might help: http://mypage.bluewin.ch/cqd/pinout/

[jinn]

Digital Audio Pinout: Pin 6 goes to the center pin on the RCA connector, Ground goes to the outside pin on the RCA connector.
[/quote]

I'm almost done, I just need a little more help.

I connected pin 6 but for the ground which pin is it on the adapter?

i was going to ground it with pin 10 is this okay

[FrostyTheSnowman]

Any ground on the XBOX is fine. I just grounded mine to the sheilding of the A/V port.