xboxscene.org forums

Author Topic: 5.1 Sound Problem With Av Pack!1!  (Read 49 times)

Tnx1040

  • Archived User
  • Newbie
  • *
  • Posts: 4
5.1 Sound Problem With Av Pack!1!
« on: March 18, 2006, 06:52:00 AM »
To get the "true" 5.1 you need to connect your speakers thru optical connector... but still u should get sound from the rear speakers using the RCA cables but it wont be 5.1 Thats my knowledge of it but maybe someone knows another solution...
Logged

alex12345

  • Archived User
  • Newbie
  • *
  • Posts: 1
5.1 Sound Problem With Av Pack!1!
« Reply #1 on: March 18, 2006, 09:40:00 AM »
Hey, I did run a optical cable from the advanced av pack into my volume control dial and yet it still gives me 2.1.  Like i have no clue anymore what to do!!!
Logged

seriouslysilly

  • Archived User
  • Sr. Member
  • *
  • Posts: 339
5.1 Sound Problem With Av Pack!1!
« Reply #2 on: March 18, 2006, 01:39:00 PM »
did you enable the 5.1 or surround in the M$ dashboard?

dunno about evox if they have an audio setting, but i know xbmc and unleash have them to.
Logged

The Zep Man

  • Archived User
  • Hero Member
  • *
  • Posts: 888
5.1 Sound Problem With Av Pack!1!
« Reply #3 on: March 19, 2006, 01:36:00 AM »
QUOTE(alex12345 @ Mar 18 2006, 07:30 AM) View Post

JUST POSTING A NEW THREAD.. SERIOUS AND URGENT!!!
What makes you think that your problem is more serious than the problems of others? dry.gif
Logged

Mr Ed

  • Archived User
  • Hero Member
  • *
  • Posts: 1739
5.1 Sound Problem With Av Pack!1!
« Reply #4 on: March 19, 2006, 08:13:00 AM »
QUOTE(The Zep Man @ Mar 19 2006, 01:43 AM) View Post

What makes you think that your problem is more serious than the problems of others? dry.gif


He didn't say it was more serious than anyone else's problem, just that is was serious/urgent to him.  You gotta inferiority complex ?  biggrin.gif

Seriously though, yes, if you enabled the surrounds sound options in the MS Dash you should be getting surround in all the speakers.  You only connected via the optical cable right?  You don't have the RCA cables connected also right?
Logged

Mr Ed

  • Archived User
  • Hero Member
  • *
  • Posts: 1739
5.1 Sound Problem With Av Pack!1!
« Reply #5 on: March 21, 2006, 03:44:00 PM »
QUOTE
the old M$ dash.


Uh then you did your mod wrong.  You should always be able to get back to the MS Dash.  It's needed for lots-o-stuff.
Logged

The Zep Man

  • Archived User
  • Hero Member
  • *
  • Posts: 888
5.1 Sound Problem With Av Pack!1!
« Reply #6 on: March 22, 2006, 09:46:00 AM »
QUOTE(Mr Ed @ Mar 19 2006, 04:20 PM) View Post

He didn't say it was more serious than anyone else's problem, just that is was serious/urgent to him.  You gotta inferiority complex ?  biggrin.gif
Sorry, Ed. I tried to give it a bit of sarcasm (posting in CAPS and with exclamation marks) but gave the 'wrong' message with it. sad.gif

@glngeorge

Your cable is made by a third-party and gives the wrong 'mode' to your Xbox. When it gives the right mode, MS Dashboard will give two extra options: "Does your receiver support Dolby Digital?" and "Does your receiver support DTS?".

You can fix your cable by grounding a certain pin. A guy named AeX tried it in another topic and he said that it was pin 18. I believe he used this schematic.

If we compare that schematic to our unofficial schematic of the AVIP port on the mainboard of our forum, then I believe this to be pin 11. Most third-party cables operate at mode 3 (which is HD without optical audio). By grounding pin 11, the mode will be changed to 2+3, like the official pack from MS does. This mode enables the extra options in MS Dashboard and also makes sure that the games use it (but only if Dolby Digital is indeed enabled in MS Dashboard).

Remember: Both schematics use different pin-numbers (beware!).
Logged