Topic: Black And White + Scrolling (Read 51 times)

Tombo1000 · « **on:** August 13, 2005, 07:59:00 AM »

it might be because it's set to ntsc in the region settings needs to be set to pal

Mr Ed · « **Reply #1 on:** August 13, 2005, 08:12:00 AM »

Sounds like it's set to PAL and you connected it to an NTSC tv.

anything · « **Reply #2 on:** August 13, 2005, 10:19:00 AM »

its a ntsc box, it has x3 menu... I am not sure where to change settings because it could be in Pal mode... SO how do i go about changing video settings?

PENTIUM75 · « **Reply #3 on:** August 20, 2005, 02:14:00 PM »

If the problem is thats its set to a bad video mode, old black and white tv's and really old computer monitors with composite inputs are usually good at displaying a good enough picture to adjust the settings back to NTSC...

A quick note on that...these older displays usually have a "vertical hold" dial which is the key, check local second hand stores eg. savers, goodwill, thirft stores. You can get them next to nothing. I believe security monitors have this feature too.

Hope that helps!

xMHUTx · « **Reply #4 on:** August 22, 2005, 10:43:00 AM »

I had a similar problem.

I originally thought the same thing *PAL v.s. NTSC*

Turned out the guy who modded it previous (a buddy) pulled up some traces near the d0 when he realized he put the d0 in the wrong spot.

After a while, I got the crap to fix it (xatco knife & conductive paint) - and its working.

... Just an idea if the *PAL v.s. NTSC* deal dosen't work - check the traces etc.

xMHUTx · « **Reply #5 on:** August 22, 2005, 10:45:00 AM »

accid. 2x post.

xMHUTx · « **Reply #6 on:** August 26, 2005, 08:58:00 PM »

No idea now...
So the box WAS working after I fixed thoes traces, now its not...

Anyone with ANY ideas at all reply - any help is much appreciated.

note: no cable, ntsc v.s. pal etc. problems. Not an old tv.

Author Topic: Black And White + Scrolling (Read 51 times)