Topic: The 'setvideomode' Hex (480p Patch) (Read 275 times)

-Spud- · « **Reply #60 on:** September 25, 2005, 07:55:00 PM »

Ah wow thanks raydn, sounds like something worth trying out anyway. Thanks again!

raydn · « **Reply #61 on:** October 07, 2005, 07:15:00 PM »

The should run 480p, but i have seen this happen before (playboy mansion) where there are both 480p and 480i ntsc retail discs. Does your tiger woods 2006 xbe have the folowing hex string(s) ?

8B 46 28 51 8B 4E 2C 52 8B 56 04 50 8B 06 51 52 50 8B CD

or

8B 57 28 50 8B 47 30 50 8B 47 2C 51 8B 4F 04 52 8B 17 50 51 52 8B CE

6zero9 · « **Reply #62 on:** October 08, 2005, 12:31:00 AM »

i've read about that too..

as far as i can tell, it has both of the examples you gave me. i'm using hex workshop to search for them, and they both pull up. i have to take the spaces out of your examples to find any thing, but after i do, it finds them both. i don't have a lot of experience with any of this, but i'm a quick learner. i noticed that taking out the spaces changed some of the "letter" values, does that make a difference?
raydn, you seem to be the guy to talk to, i hope i can make this as easy as possible for you. any assistance i get from you or anyone here is really cool.
thanks in advance
zero

raydn · « **Reply #63 on:** October 08, 2005, 04:56:00 AM »

I will twist the above around in a short while for you and magic up a patch that should help you out, nothing to hard. Just make sure that you do have the xbox in ntsc mode and 480p is enables in the dash

basically this 8B 46 28 needs to be nopped (90s) and a 50 later in the line needs to become 6A 00. You might be able to figure this one out... so you have 90 90 push the remaing hex along one and change one of them 50s at the end to 6a 00. hex should still be same length.

I'll post back later when i check which one it is.

raydn · « **Reply #64 on:** October 08, 2005, 06:33:00 AM »

try these

CODE

replace

8B 46 28 51 8B 4E 2C 52 8B 56 04 50 8B 06 51 52 50 8B CD

with

90 90 51 8B 4E 2C 52 8B 56 04 6A 00 8B 06 51 52 50 8B CD

and possibly this one too if the first doesn't fix it.

CODE

replace

8B 57 28 50 8B 47 30 50 8B 47 2C 51 8B 4F 04 52 8B 17 50 51 52 8B CE

with

90 90 50 8B 47 30 50 8B 47 2C 51 8B 4F 04 6A 00 8B 17 50 51 52 8B CE

6zero9 · « **Reply #65 on:** October 09, 2005, 01:48:00 AM »

ah yeah, thanks mate. the only help i've had thus far. i will look into it tomorrow as i've been out and got rather rounded. i'll let you know what happens with it as soon as i get the chance.

cheers

6zero9 · « **Reply #66 on:** October 09, 2005, 09:05:00 AM »

right on, just tried it. all makes a lot more sense when the room isn't spinning. anyway, i tried your first example and nopped out the first few sets, works great now. that was quick ;-)
thanks mate
wes

wait a sec, i just tried it again and it's back to the same problem. i'll tinker with it and see what i can do.

jo77 · « **Reply #67 on:** October 10, 2005, 08:40:00 PM »

maybe a dumb question, but would that TW2006 fix above work on the pal version to get 480p operational ? all Tiger Wood pal versions have been 480i only so far.

Does anyone out there have the Pal version ? I never bothered after 2004 because of the probs I had with Tiger WOods pal.

raydn · « **Reply #68 on:** October 10, 2005, 08:59:00 PM »

which tiger woods are in 480i

6zero9 · « **Reply #69 on:** October 10, 2005, 09:01:00 PM »

probably worth trying, jo. if anyone has an answer, raydn would be the one.

speaking of which, i did try again, and finally got it to work reliably. had to tinker with evox a bit. my video mode was set to default, which usually works. so i didn't really think much of it. the weird thing was that, after i edited the hex code, it worked under unleash just fine. so, i tried going to evox and playing from there, with the trainer. i got the squiggly lines again. the oddest thing was that when i IGR'd my box, i would get the squigglies (technical terminology?) again. if i turned my box off and turned it back on, unleashx would play it just fine. only when i soft rest did i get the problems. no big deal, it works great now, but i've never run in to that before.
just thought i'd throw that out there.
thanks again, raydn, keep it up.
wes

raydn · « **Reply #70 on:** October 11, 2005, 03:12:00 AM »

I think another forum member posted something similar happening with serious sam on his set up, came up on screen all messed up.

silvermax · « **Reply #71 on:** April 29, 2006, 07:43:00 PM »

i need a the favor back
Can any1 patch to 480p the game WINBACK2? Im trying to do it... looks hard...
THANXXX

doidgy · « **Reply #72 on:** May 02, 2006, 01:46:00 PM »

Have tried searching in LMA Manager 2006 for the Hex (1st Post)
I found it exactly as listed, but spread over two different lines. Is this relevant?
I changed to alternate Hex but I still get a Black Screen.
Any advice?

rst100 · « **Reply #73 on:** May 07, 2006, 07:39:00 AM »

Someone knows if exist some patch to make possible the game Stolen works with x2vga+ adpater ?

thx

raydn · « **Reply #74 on:** May 09, 2006, 11:43:00 AM »

QUOTE(rst100 @ May 7 2006, 01:46 PM)

Someone knows if exist some patch to make possible the game Stolen works with x2vga+ adpater ?

thx

I patched Stolen last year

Stolen

CODE

C7 46 4C 20 00 00 00
C7 46 4C 00 00 00 00

Author Topic: The 'setvideomode' Hex (480p Patch) (Read 275 times)