Topic: No Audio Or Video! (Read 213 times)

snaveint · « **on:** January 30, 2004, 04:22:00 AM »

i have the same problem right now! arrgh id love a response on what to do... this happend to me, after i was installing XBMP on my xbox, and playing a vid on it.. when i was done i turned it off now when i turn it off theres no signal, but the dvd and hdd work i ca hear it and i can eject with no problems, i can also log onto the xbox through FXP... argh!!

snaveint · « **Reply #1 on:** January 30, 2004, 04:53:00 AM »

i fixed it!

firstly.. go and download

enigmah video switcher

try a google.com
if u cant find it PM me
or email me at [email protected] i'll send it to you

then extract the iso...
add a big file (any big file just so that it makes it easier for xbox to read)
recreate the iso (i used Xiso :S)

then burn it
put the disc into xbox

wait a bit to load it up
push B for NTSC-M
push A for PAL

reboot it and wala!

yay!!

cyberstven · « **Reply #2 on:** January 31, 2004, 08:10:00 AM »

Hey, I used that program and it worked great! Thanks a lot!

Stickan · « **Reply #3 on:** January 31, 2004, 11:47:00 AM »

hey! i have the simliar problem.. after playing around with PAL and NTSC in XBMP my xbox is not starting up.. (i have a NTSC-J in Europe).. Hope this enigmah video switcher will help me too..

Stickan · « **Reply #4 on:** January 31, 2004, 12:20:00 PM »

It worked for me as well! Thanks a bunch!

cyberstven · « **Reply #5 on:** February 01, 2004, 12:40:00 PM »

They should post a sticky on this because its been a big problem.

klnyc · « **Reply #6 on:** February 04, 2004, 06:15:00 AM »

Ooooooh crap, every one got it fix. I CANT wait till I go home tonight and try this Enigmah switcher. I have the same problem like you guys had. My has picture and sound,but the video output is skipping(like an old black and white tv that is broken)
So, I will need a dummy file in the dvd/cdrw also?

klnyc · « **Reply #7 on:** February 04, 2004, 04:16:00 PM »

Woohoo, Enigmah rock. It was the region was messing me up. It was set at PAL instead of NTSC-M

jcfromkc · « **Reply #8 on:** February 07, 2004, 12:26:00 PM »

Thanks guys..

I was having the same prob.

This works great..

You gotta pin this.

jcfromkc · « **Reply #9 on:** February 09, 2004, 02:03:00 PM »

I made a boot disk with the Video Selector program on it. I only put the Video Selector program on the disk. I booted the XBOX up, and I could hear the CD spinning, and I noticed that the XBOX wasnt trying to keep re-booting itself. So I just pressed the B button, and then turned the XBOX off. It came on, and now the video is back.

I did the same thing, I messed up the setting in the XBMP.

Try differ disks, or diff burning programs, this program is a life saver, and it will work for you.

xbox_friend · « **Reply #10 on:** February 11, 2004, 06:24:00 PM »

konstrain--- did you ever get this issue fixed..

I've been working on it for the last few hours now, to no avail...

konstrain · « **Reply #11 on:** February 11, 2004, 08:37:00 PM »

xbox_friend · « **Reply #12 on:** February 12, 2004, 03:19:00 AM »

FINALLY got it working... I finally got my video back and I had sound (temporarily), until I put the cover back on my xbox... I'm guessing I might have pinched some wires or something (any ideas)... but, the fix was to re-flash the EEPROM.. Legal EEPROM Flash.

It was a pain, considering I have the Matrix, but got it done, then reflashed the chip to X2 4977, and everything (minus sound), is working great!

Vinvin · « **Reply #13 on:** February 24, 2004, 05:05:00 PM »

the video selector is really good.. help me wif a lot of problems..
thanx a mil..

IDDQD · « **Reply #14 on:** February 26, 2004, 07:14:00 PM »

OH GOD IT WORKS THANK YOU SO MUCH!

Author Topic: No Audio Or Video! (Read 213 times)