xboxscene.org forums

Pages: 1 2 [3] 4

Author Topic: L33's A/v Faq  (Read 382 times)

kokkorollo

  • Archived User
  • Newbie
  • *
  • Posts: 12
L33's A/v Faq
« Reply #30 on: January 24, 2004, 04:14:00 PM »
yes l33!
i tell you that i'm in NTSC mode, but i don't have a VGA-patched bios why my modchip (homebraw) is only 256k!
is this the problem?
you now if the aladdin is a 512k modchip?
Logged

L33

  • Archived User
  • Jr. Member
  • *
  • Posts: 91
L33's A/v Faq
« Reply #31 on: January 24, 2004, 05:07:00 PM »
QUOTE (jm_007 @ Jan 24 2004, 11:40 PM)
ok, my monitor has bnc's, it works with sync on green.

what do i need? just a component a/v lead and a set of bcn adaptors?

Yep, and dont forget a VGA bios and to set your HDTV pack into VGA mode smile.gif
Logged

L33

  • Archived User
  • Jr. Member
  • *
  • Posts: 91
L33's A/v Faq
« Reply #32 on: January 24, 2004, 05:10:00 PM »
QUOTE (kokkorollo @ Jan 25 2004, 02:14 AM)
yes l33!
i tell you that i'm in NTSC mode, but i don't have a VGA-patched bios why my modchip (homebraw) is only 256k!
is this the problem?
you now if the aladdin is a 512k modchip?

Yes this is a problem. You need a VGA bios.
I have no idea about the aladdin, i've never used homebrew-type chip.
Logged

kokkorollo

  • Archived User
  • Newbie
  • *
  • Posts: 12
L33's A/v Faq
« Reply #33 on: January 25, 2004, 06:09:00 AM »
damn!
now i'v to found a 512k bios!
what kind of modchip have this memory?
Logged

spillage

  • Archived User
  • Hero Member
  • *
  • Posts: 697
L33's A/v Faq
« Reply #34 on: January 25, 2004, 07:08:00 AM »
laugh.gif
Logged

CRCinAU

  • Archived User
  • Newbie
  • *
  • Posts: 5
L33's A/v Faq
« Reply #35 on: January 25, 2004, 07:18:00 AM »
smile.gif

The only thing I would improve on is that I could change the boot bank in Mode 1 without having boot, then reboot into the bank I wanted... Having some kind of choice at startup or combo-key would be nice - but hey, you can't have everything you want smile.gif
Logged

DieNastyakaTestament

  • Archived User
  • Newbie
  • *
  • Posts: 34
L33's A/v Faq
« Reply #36 on: January 25, 2004, 06:59:00 PM »
Hey L33 could you post a diagram of the vga pinout? I know there are a few pinouts out there, but most of them are full of discrepencies, this would be very much appreciated thanks...
Logged

DieNastyakaTestament

  • Archived User
  • Newbie
  • *
  • Posts: 34
L33's A/v Faq
« Reply #37 on: January 26, 2004, 06:06:00 AM »
Oh so the connections are to the male end? I thought they were to the female end...
Logged

spillage

  • Archived User
  • Hero Member
  • *
  • Posts: 697
L33's A/v Faq
« Reply #38 on: January 26, 2004, 01:54:00 PM »
I had that fault the other day on old monitor from Mitsubushi. Signal out of range etc and that was WITH an X2VGA!!!

Unresolved at this time.
Logged

nefarious0

  • Archived User
  • Newbie
  • *
  • Posts: 2
L33's A/v Faq
« Reply #39 on: January 26, 2004, 03:23:00 PM »
QUOTE
Are you using a VGA bios?


Not unless that's part of the original MS bios (my guess is no).  

So, I should probably readdress this issue after I've installed a mod chip?
Logged

L33

  • Archived User
  • Jr. Member
  • *
  • Posts: 91
L33's A/v Faq
« Reply #40 on: January 27, 2004, 01:09:00 AM »
QUOTE (nefarious0 @ Jan 27 2004, 01:23 AM)
QUOTE
Are you using a VGA bios?


Not unless that's part of the original MS bios (my guess is no).  

So, I should probably readdress this issue after I've installed a mod chip?

Yes you'll need a VGA bios to correct the H & V sync signals and colours.
Also have you set the pins on the HDTV pack to VGA mode? (connect pin 9 to 10, and 13 to 14).
Logged

death trap

  • Archived User
  • Jr. Member
  • *
  • Posts: 86
L33's A/v Faq
« Reply #41 on: January 27, 2004, 01:34:00 AM »
Hi.  I have two Game brand cables, one is a scart cable wiith a optical out, the other is a s-vhs cable without optical. I would like to add a s-vhs jack to the scart cable, is this posible, are the rgb pinouts the same (diferent mode selected).

Cable 1
user posted image

Cable 2
user posted image
Logged

Ben999_

  • Archived User
  • Hero Member
  • *
  • Posts: 651
L33's A/v Faq
« Reply #42 on: January 28, 2004, 12:20:00 PM »
great job with the FAQ
Logged

qpsxmod

  • Archived User
  • Newbie
  • *
  • Posts: 7
L33's A/v Faq
« Reply #43 on: February 04, 2004, 10:56:00 AM »
Hi, I have install a VGA port onto my V1.0 Xbox using L33's TUT withn LM1881.  I am using PIXEL8 bios. I have a problem with the output. it seem like there there is a layer of green on the screen although it is showing full color.

I did some expreriments on it and notices something.
I took out the red and green cables - I can see a "Dim" blue screen
I took out the blue and green cables - I can see a "Dim" red screen
I took out the red and blue cables - I can see a "Bright" Green screen

So i think the problem is that the Green signal is too strong that is why it left a green filter on the screen eventhough it is showing color. can any one help me to fix it?

I have use all the correct part memtion in the tut, however, i only have a 660Ko resistor.

Thanks
Logged

EvilWays

  • Archived User
  • Hero Member
  • *
  • Posts: 909
L33's A/v Faq
« Reply #44 on: February 04, 2004, 01:52:00 PM »
L33...might wanna throw on a list of games that have problems with the mod. I think there's only a few, but it'd probably save some time.
Logged
Pages: 1 2 [3] 4
« previous next »