Topic: Newbie Questions (Read 69 times)

sr_sparky · « **on:** July 28, 2005, 05:54:00 PM »

Maybe try booting with the eject button... some chips work like this, or hold the power button for a couple of seconds...

Jezz_X · « **Reply #1 on:** July 28, 2005, 05:56:00 PM »

Maybe email the person you bought it off and ask him about it

LycoLoco · « **Reply #2 on:** July 28, 2005, 07:27:00 PM »

Just to note, it's soft modded. Did I screw this up forever without even getting to play around?

xboxgamer733 · « **Reply #3 on:** July 29, 2005, 04:40:00 AM »

QUOTE(LycoLoco @ Jul 28 2005, 06:59 PM)

Ok, now I've got a problem. I accidentally switched the output to NTSC-J. Any way to change that back easily without FTPing?

There is a program at Xbins that you burn to a disc, and it lets you switch the video mode by pressing a button on the controller.

It is located at 'XBOX/apps/utilities/video mode switch'.

LycoLoco · « **Reply #4 on:** July 29, 2005, 11:20:00 AM »

Also, if I hold down the power button, as if I were to go into the mod-screen, it goes into an infinite-reset loop.

(sorry about the double post, it wouldn't let me edit a second time)

LycoLoco · « **Reply #5 on:** July 31, 2005, 01:50:00 PM »

LycoLoco · « **Reply #6 on:** August 01, 2005, 12:12:00 AM »

Fixed it! The dashboard would boot if I had the Enigmah disc in the drive as well as held down the power button, and then I just pressed B to set it back to NTSC-M

Thanks all that helped or tried to! Just know that for soft-modded boxes this seems to be the only way to solve the problem.

Author Topic: Newbie Questions (Read 69 times)