Print

[Heimdall]

QUOTE

i decided to organize The E and F partion of my drive by deleting and moving around some seemingly safe files

This almost certainly deleted / moved your softmod dash, and

QUOTE

I tried fixing this by loading Slayers Evox recovery install disk or w/e and choosing the option to completely rebuild/format and re upload Evox dash thing

this deleted your entire C partition, including the softmod - Slayers only works properly on chipped / flashed Xboxes.

You have to start again. Make sure you use Krayzie 1.1.1 if you're doing a gamesave softmod, or Kingroach NDURE 3.1 if you're rebuilding the disk with your eeprom backup and xboxhdm.

[ncarty97]

Howdy all!  I'm experiencing a similar problem.  Essentially it went like this:

My Xbox is hard-modded with an Executer chip.  I set up XBMC a year or so ago.  Life was good.

Well, the wife asked why it couldn't just boot directly into XBMC since I never play games on it anymore.  I said, good idea, looked up how to do it.  I followed the instructions here:

XBMC install instructions

I ftp'd into the Xbox just fine.  Since I was in there, I downloaded and copied over the latest version of XBMC.  

I then went about uploading the new xbe file.  I made the changes on my PC as directed in the link.  I thought it a good idea (apparently I was wrong), to make a copy of the original evoxdash.xbe file.  So I renamed it evoxdash.old.  I was then going to load the 'new' evoxdash.xbe' file over the FTP.  Apparently, renaming the file caused the FTP to stop working.  I was completely unable to connect via FTP after that.

When I rebooted the XBox, I now see the MS dashboard.  So, I looked up how to re-install the Evox dashboard.  Seems like everyone says to burn an iso of the evox files on a disc, boot from it, connect by FTP, and copy over the correct files, and it will be fixed.

Only thing is, I can't get a burned disc to work with the Xbox now!  I'm wondering if I am doing something wrong with either how I am burning or how I created the iso.  

I've tried the following media and failed:
memorex CD-RW (12x 700MB)
maxell DVD-R  4.7GB (16x)
Sony DVD-R
Digital Research CD-r (16x)  (I know CD-R don't generally work, but I figured, what the heck)
memorex DVD+RDL (8x)

I have some Verbatim DVD+RDL that I haven't tried yet, but I only have a couple so I figured I'd check first before I just make more frisbees.

I used Nero (express 6) to burn the CD-RW, but it would not let me burn the image to a DVD-R, saying it was the wrong format or something like that and needed a CD-R or CD-RW.  So I used Power2Go for the DVD's.  I did the CD-RW with both.

Thre weren't many options in xiso, so I'm not sure how I could have screwed that piece of it up, however, the file is only 2.44MB, so I don't know if that is correct.  (It does appear to have all the files in it for Evox though).

So anyway, my question is:

1) Any ideas on why I can't get any of these discs to play
2) If not, is there another way of getting the the new dashboard on?  I don't mind taking the hard drive out, but it seems that in order to get it viewable on my PC, I'd need to unlock it first, which I need the new dashboard for.  

My last resort has been that when I modded my XBox the first time, I backed up the entire XBox hard drive onto one of my extra drives.  I was thinking of upgrading the drive in the XBox anyway, using a spare 100GB I have.  So I'm wondering if I could just use that backup, set it up the way I want, then install it. and go from there.  That sounds far to easy though!  

Thanks for your help.

[Heimdall]

It's not really a similar problem. The OP has removed his softmod, whereas you have just removed the dash on a chipped Xbox.

Just cold boot with a rescue disc like Frosty's or Slayers onto DVD-R, and then use ftp to repair your installation.

FYI the reason your disc probably didn't work is that you didn't make the iso image with Qwix. Xbox iso files have a different format, you need to use Qwix to create iso images in xiso format.

[ncarty97]

Thanks.  I actually was able to get it to work using the Slayer ISO.  I had read that xiso would make the xbox specific ISO, but maybe that is no longer the case.