Topic: Having Problems Ftping My Xbox (Read 45 times)

saif2000 · « **on:** January 27, 2007, 02:05:00 PM »

Hello good people of xbox-scene.com i m new to this web site so i m sorry in advance if i mention anything im not supposed to. well first of all i took a cross over cable and put it into the back of my xbox. I dont have a router so i put the cross over wire in the back of my pc. in order for me to do that, i have to remove my internet connection wire because i only have 1 place to put it. i m trying to install evox dash build 3995 and after i hooked up my computer. i put the CD in and restarted my xbox. the disk worked fine but when i looked in the settiongs in evox it under "Network" it said "Type" and beside it, it was blank and the secend one under network was "IP" and beside it was blank too and the third one under network said "line status" and beside that, it said "no link!" any explnation? and when i typed in the nessory info in FlashFXP it said connection failed (no route to hoast) som 1 please help me

nathan24 · « **Reply #1 on:** January 27, 2007, 02:17:00 PM »

i am kinda new to ftp too but i think sumjthins wrong with ya crossover cable

saif2000 · « **Reply #2 on:** January 28, 2007, 09:42:00 AM »

no i m 100% sure my cross over cable works because i m using the same cross over cable i m useing for my internet and my internet works fine.

Moonkeeper · « **Reply #3 on:** January 28, 2007, 12:39:00 PM »

Did you change the "static IP" setting?

wickedZ · « **Reply #4 on:** January 29, 2007, 07:18:00 AM »

You said this is the same cable your using for your internet.. Right there, Im thinking.. Its not a cross over cable. You run a straight cable from modem or router to the pc. If your going pc to xb you need a different type of cable, which is a cross over. The wiring is slightly different in a cross over than normal ethernet cable used for internet connection from modem or router.

Get a cross over cable, make one or get a router. You can pick either up fairly cheap.

saif2000 · « **Reply #5 on:** January 29, 2007, 01:02:00 PM »

Thank u guys very much but i m sure its a cross over cable because it says "X'over"and on the oppisite sideis says "N11306" the place right b4 u plug it in. But arnt there differnt types of cross over cables? if there is EXACTLY which 1?

and 1 more this on what do i change my stactic IP and how? lol

Thank u guy. its greatly appreciated. =)

goldensons2 · « **Reply #6 on:** January 30, 2007, 08:52:00 AM »

QUOTE(saif2000 @ Jan 29 2007, 02:33 PM)

Thank u guys very much but i m sure its a cross over cable because it says "X'over"and on the oppisite sideis says "N11306" the place right b4 u plug it in. But arnt there differnt types of cross over cables? if there is EXACTLY which 1?

and 1 more this on what do i change my stactic IP and how? lol

Thank u guy. its greatly appreciated. =)

Iam new too, maybe you have similiar problem with me, take a look on the thread that I posted!
Last night, was the first day I can see the connection between PC and Xbox, AFTER the dashboard indeed installed in Hdd!!!NOT on the boot disc!!
Crossover or not, simply put side by side the ends of the cable, if the colors order is "mess up" that is crossover/xover cable, if exactly the same order that is patch cable, I hope you will get this done earlier than me.

This post has been edited by goldensons2: Jan 30 2007, 04:55 PM

saif2000 · « **Reply #7 on:** January 30, 2007, 01:00:00 PM »

(IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) Thank u very much goldensons2 and all the other people that helped (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif)
so... i read what it said along the cable and it said patch cord , but... the question still remains what wire should i get? I heard a RJ45 crossover cable is very commonly used. should i get it?

This post has been edited by saif2000: Jan 30 2007, 09:02 PM

goldensons2 · « **Reply #8 on:** January 30, 2007, 01:07:00 PM »

QUOTE(saif2000 @ Jan 30 2007, 02:31 PM)

(IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) Thank u very much goldensons2 and all the other people that helped (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif) (IMG:style_emoticons/default/smile.gif)
so... i read what it said along the cable and it said patch cord , but... the question still remains what wire should i get? I heard a RJ45 crossover cable is very commonly used. should i get it?

(IMG:style_emoticons/default/tongue.gif) Depend! If you have router use Patch cable, otherwise (between PC and Xbox directly) use crossover/xover cable (less than$10 thing in ebay). (IMG:style_emoticons/default/laugh.gif)

saif2000 · « **Reply #9 on:** January 31, 2007, 05:16:00 AM »

(IMG:style_emoticons/default/smile.gif) thank u man, u helped aolt. i swear if i was 18 i would have given u a donation (IMG:style_emoticons/default/biggrin.gif) lol

This post has been edited by saif2000: Jan 31 2007, 01:32 PM

saif2000 · « **Reply #10 on:** January 31, 2007, 01:56:00 PM »

(IMG:style_emoticons/default/happy.gif)

wickedZ · « **Reply #11 on:** February 04, 2007, 06:26:00 AM »

Re-read my reply... I told you it was the cable.. You in turn said no its the right one.. I said you do not use the same cable you do to connect to the internet.. I was trying to make it easy for you to understand, guess that wasnt easy enough.. Oh well.. who gives a s.........

saif2000 · « **Reply #12 on:** February 07, 2007, 01:42:00 PM »

Hello good people of xbox-scene.com. Well i have another ploblem ftping my xbox.i got the nessary wire and is works. i m trying to install evolutionx dash board. when i connect my computer and put the CD in ans go in settings, it works fine, it shows me my IP and and allthat stuff it shows u in blue writing at the top. BUT... when i open FlashFXP , went to quick connect,typed in the IP addres i got from the evox.ini and i typed in the password(xbox) and user name (xbox) it trys to connext for a little wild then after about 45 seconds at the bonnom is says "opperation timed out". Does any 1 have the sluton for this? if will be greatly appreciated.

Thank You in Advance: Saif (IMG:style_emoticons/default/smile.gif)

Xombe · « **Reply #13 on:** February 07, 2007, 03:29:00 PM »

Have you set your PC's NIC settings as needed (as per the guide pinned in Newbie Chat)?

If your Xbox and PC are on different subnets you'll not be able to communicate.

Check your settings, then try to ping the Xbox first. If you cannot do that FTP setup is still a future concern.

Xombe · « **Reply #14 on:** February 07, 2007, 06:17:00 PM »

Member found to be pirating games, account closed.

Closed: Don't want anybody wasting their time.

Author Topic: Having Problems Ftping My Xbox (Read 45 times)