Topic: Using Ftp Through Evox Boot Disk (slayers) (Read 37 times)

mrRobinson · « **on:** July 16, 2004, 09:37:00 PM »

Read the tutorial in my sig to find the settings that will work for however you have the xbox physically connected. Regardless you will need to edit the evox.ini on your computer and then reburn it to a new disc with the settings you've made. it is probably set to static ip = no and you probably need static ip = yes.

jack2004 · « **Reply #1 on:** July 17, 2004, 12:04:00 AM »

you need qwix program to extract iso and edit evox.ini and turnthem into xiso again by using the same program and then burn

dachef26 · « **Reply #2 on:** July 17, 2004, 01:36:00 AM »

i'm tryin this. Just edited the .ini, and i'm gonna try it. Hopefully it works! Thanks.

dachef26 · « **Reply #3 on:** July 17, 2004, 09:27:00 AM »

Still no luck! I read your tutorial and everything, and I still get the 0.0.0.0 IP. are there any other programs that I could put on a CD that would allow me to FTP to my hard drive so I could replace the dashboard?

mrRobinson · « **Reply #4 on:** July 17, 2004, 09:31:00 AM »

Well how do you have your xbox hooked up to your computer? Post an ipconfig /all from your pc and the evox.ini network section you are using.

Scaramanga · « **Reply #5 on:** July 17, 2004, 09:44:00 AM »

1. Don't use slayers.
2. Read- http://www.uchuff.co...amang/dash.html

mrRobinson · « **Reply #6 on:** July 17, 2004, 04:50:00 PM »

in command prompt run ipconfig /all > ipconfig.txt
then open the ipconfig.txt with notepad and copy n paste.

dachef26 · « **Reply #7 on:** July 20, 2004, 12:11:00 AM »

Bump I know someone can help me w/that info...

jack2004 · « **Reply #8 on:** July 20, 2004, 12:18:00 AM »

put defaultgateway in boot disk same as your pc IP
and try this trick
1. connect xbox to pc
2. boot evox leve it at menu ( just leve it)
3. open flash fxp then connect
and don't forget to check your crossover cable for any defective

Author Topic: Using Ftp Through Evox Boot Disk (slayers) (Read 37 times)