Topic: How To Install Evox In Xbox Hdd ? (Read 35 times)

Fontana · « **on:** February 25, 2004, 02:22:00 PM »

Ok i finally got Evox on a CDRW, and it works on my xbox, but now, how i pass it to the HDD?

I know its using Flashfxp, but i have a problem , i cant change the xbox IP because i dont have the Save an Exit options on Settings... how can i change it?

If my xbox gives me an IP, it means that the network is set up correctly?

Please help ! thx

xboxzombie · « **Reply #1 on:** February 25, 2004, 03:17:00 PM »

are you using a router

Fontana · « **Reply #2 on:** February 25, 2004, 03:23:00 PM »

nop... a hub
and im using a crossover cable, because they told me that in some hubs it will work..
anyway, if it gives me an Ip, it means it works?

thx!!

xboxzombie · « **Reply #3 on:** February 25, 2004, 03:32:00 PM »

go from pc to xbox with your crossover cable

This post has been edited by xboxzombie: Feb 25 2004, 11:32 PM

Fontana · « **Reply #4 on:** February 25, 2004, 03:36:00 PM »

ok, i did that, and now what?

i swear i read ALL tutorials about this, but i still cant make it work .!

xboxzombie · « **Reply #5 on:** February 25, 2004, 03:38:00 PM »

here http://evox.xboxhackz.net/evox/guides/body...networking.html

Fontana · « **Reply #6 on:** February 25, 2004, 04:15:00 PM »

ok ...i have just make this network..

Instructions:
1. The first step is to make sure you PC has a static internal IP address.Â Go into your NIC's TCP/IP Properties, and check off "Use the Following IP address:" Next, where it says IP address, enter: 192.168.0.1. Where it says Subnet Mask, enter: 255.255.255.0. Click on Ok, and exit.

2. If you have loaded the EvolutionX dashboard onto your Xbox, and you want to assign your Xbox a Static IP, go into Network, and under Static IP, enter: 192.168.0.x (where x is a number from 2 - 255). For the Default Gateway, enter: 192.168.0.1.

3. If, however, you are using ICS or Winroute on your main PC, you already have a DHCP server, and it really isn't necessary to load the EvolutionX dashboard onto your Xbox HDD So in this case, the IP assigned to the Xbox by the DHCP server (on your computer) will be done automatically each time the Xbox is turned on.Â In other words, the Xbox will be assigned a dynamic IP, which will be different each time the Xbox is turned on. The only way to have a static IP on the Xbox is to follow step 2.

But u have to help me a little

my english isnt good..

in step number 1, i have to enter that ip number into the NIC which is connected to the modem?

another thing.. the xbox's Default Gatewat, has to match the Ip address on the NIC? which NIC?

thanks for helping!!!

xboxzombie · « **Reply #7 on:** February 25, 2004, 05:19:00 PM »

what operating system on pc

Fontana · « **Reply #8 on:** February 25, 2004, 05:50:00 PM »

Win XP

xboxzombie · « **Reply #9 on:** February 25, 2004, 06:01:00 PM »

go to my network places on desktop then click on view network connections then right click on local area connections go to properties left click on the tcp/ip then click on the properties tab then follow the tut

http://evox.xboxhackz.net/evox/guides/body...networking.html

Author Topic: How To Install Evox In Xbox Hdd ? (Read 35 times)