Topic: Boot Without A Video Cable Plugged In (Read 125 times)

Progmetal · « **on:** August 08, 2004, 06:33:00 AM »

I'm thinking of making a svideo and coax output in my box, and i would like it if i wouldn't have to have the old video cable plugged in. In several tutorials i've found lots of things, one tut. said that i have to solder pin 5 and pin 6 to pin 17, another said that it was 18 to 17 to 5 etc. Does anyone know which pins i should connect or ground?

jeremydammit · « **Reply #1 on:** August 08, 2004, 03:35:00 PM »

yeah this is a picture i made. put a switch in line.

(IMG:http://img.photobucket.com/albums/v160/jeremydammit/Picture.jpg)

Progmetal · « **Reply #2 on:** August 08, 2004, 04:08:00 PM »

Thanks man! , but i have yet another question (sorry!), why do i have to put a swich in there, is it because otherwise you can't use the old cable?

jeremydammit · « **Reply #3 on:** August 08, 2004, 04:48:00 PM »

yes, and you can have the plug and the video cable i think, to have two screens at one time. I have an xbox with a lcd screen in the front and i had to figure all this out. with that switch not there the video comes out all messed up on the tv, but works fine for the lcd. with it not there you need the cable in, but both should work, if fnot lemme know and i can make it work.

DaddyJ · « **Reply #4 on:** August 23, 2004, 08:42:00 PM »

if i short these 2 places together will I still need the cable? I'm just wanting to be able to boot the xbox with no video cord at all. Will this work?

This post has been edited by DaddyJ on Aug 24 2004, 09:14 PM

DaddyJ · « **Reply #5 on:** August 24, 2004, 02:14:00 PM »

phire · « **Reply #6 on:** August 26, 2004, 12:20:00 PM »

there are bios's that support no-a/v

Author Topic: Boot Without A Video Cable Plugged In (Read 125 times)