Topic: Help Loading Evox (Read 28 times)

achysklic · « **on:** January 05, 2004, 06:28:00 AM »

ok here's what I have done so far after installing mod chip and flashing it ok i dled evox 3935 i changed the xbe to default.xbe the evox.ini i modify little and made a dummy folder named abc.dat made all them a iso with simplexiso burned the iso with nero. on a cdrw liteon cd this is the same cd xbox recong. to flash my bios go a message disk cannot be recong. so i burned them on a liteon dvdrw same message then tried a liteon dvd+r same message i tried making the dummy folder from 50mb -200 -300-600mb none workedtried renaming dummy folder to 0dummy same message tried changing what i put in the dummy folder same message.
then i took a pc dvd drive hooked it up with a splitter along with xbox drive same error.. please help this has been driving me crazy for 3 days i have burned @ every speed followed evety tut. i could find just am @ the point i dont know what to do :huh:

chefelf · « **Reply #1 on:** January 05, 2004, 06:49:00 AM »

What DVD drive do you have in your Xbox? Make sure the brand and type of media you're using is compatible with that drive.

If you have a Thomson (which I'm assuming you do) you're going to have some problems.

achysklic · « **Reply #2 on:** January 05, 2004, 07:12:00 AM »

yes i have a thompson but the media i am using on buring the evox the liteon cdrw worked when i burned my bios for my modchip on it

baritoner · « **Reply #3 on:** January 05, 2004, 10:36:00 AM »

i also have a thompson drive and have been unsucessful. i am on the same boat.....just to make one thing clear though, when u d/l evox, u change the evoxdash.xbe file name to default.xbe.....right? how do we get discs to read on a thompson drive?

ps. what i did to test media is i burned a short clip movie on a few diff brands & formats of dvd's and it loaded fine.

maxsee · « **Reply #4 on:** January 05, 2004, 11:18:00 AM »

QUOTE

yes i have a thompson but the media i am using on buring the evox the liteon cdrw worked when i burned my bios for my modchip on it

Dont give up keep trying - get a virgin (brandnew) CDRW again - go back and check all your steps carefully

achysklic · « **Reply #5 on:** January 05, 2004, 01:52:00 PM »

i went out and bought some new cdrw's burned just as before same error tried rebooting the disk @least 30 times still same error , i have come to the conclusion i must be burning something wrong. when i make the 3 files a xiso using simplexiso should it be just one large winrar file , cos when i make iso for pc games they are a winrar file @all they are a .bin and .cue

please help also when i click on the winrar file it flashes but thats it is this right?

achysklic · « **Reply #6 on:** January 05, 2004, 02:12:00 PM »

i am dling slayers 2.5 hoping it will help off newsgroups 1 problem though need to find a par file it has 2 incompletes and only 1 par file ow ell hope i find another file

mrbojanglez50 · « **Reply #7 on:** January 05, 2004, 08:19:00 PM »

I am also having this same problem... Specs:

Xbox Ver. 1.0
Tompson Drive
Xecuter 2.3 lite plus (installed)
Bios: Xecuter2.4980

I burned the Bios to a Fujifilm DVD-RW disc using my Sony DRU-510A DVD Burner and it worked fine... It loaded and was able to flash. Then I tried loading the evolution X dashboard. I followed the directions found here: http://lookformeb.bmforums.com/tutorials/

Renamed EVOXDASH.XBE to DEFAULT.XBE, made a 100 MB dummy file name ABC.DAT using (DummyFile.exe), then dragged those 2 files and the "skins" folder and the "evox.ini" and placed them in a folder named Evox. I then used XISO v 115 to make the folder into an ISO. Then I opened Nero, selected "Burn Image" and selected the newly created EVOX.ISO i made. Burned it, no luck. I get a error #13 evertime i try to load the disc.

ANY IDEAS???

This post has been edited by mrbojanglez50: Jan 6 2004, 04:21 AM

tribefiend · « **Reply #8 on:** January 05, 2004, 08:57:00 PM »

change the name of your dummyfil from abc.dat to 1.dat

It will insure that the dummyfile is burned first and help the thompson read it.

achysklic · « **Reply #9 on:** January 06, 2004, 02:18:00 AM »

ok i changed dummy folder from abc.dat to 1.dat no good same thing wont recongise cd........i used xiso to examine the iso i made and here's what it looks like
1.DAT.BIN sector 34 size 157286400 ATTRIBS F RIGTH 6

default.xbe sector 76834 SIZE 770048 ATTRIBS F RIGTH 13

evox.ini sector 77210 SIZE 3409 ATTRIBS F RIGHT 0

I BURNED THIS WITH NERO as a new cdiso no good so i tried burning it with nero as cd-rom UDF/ISO and checked and cheked forve dvd compat mode still no good does my iso look ok i am truely lost on this one i have tried different media cdrw dvd+r dvdrw on all i get xbox cant recongise disk although it recongised the cdrw for flashing the bios please help...

achysklic · « **Reply #10 on:** January 06, 2004, 05:04:00 AM »

okupdate i dl slayers 2.5 burned on a virgin cdrw just as indicated guess what same error xbox dont recongise disk so i then took my dvd burner out which hooked it up to my xbox just as the tut. shows leaving both drives hooked together and still same error i here the drive spinning up but xbox won't recongise it how is this possible on a different drive that i know recongises it?

maxsee · « **Reply #11 on:** January 06, 2004, 06:44:00 AM »

QUOTE

BURNED THIS WITH NERO as a new cdiso no good so i tried burning it with nero as cd-rom UDF/ISO and checked and cheked forve dvd compat mode still no good does my iso look ok i am truely lost on this one i have tried different media cdrw dvd+r dvdrw on all i get xbox cant recongise disk although it recongised the cdrw for flashing the bios please help...

Okay Since you have tried for days and still having problems
Here is some options
1. Get someone you know can help you to come to your house
2. Get someone to send a copy of EvoX Boot Disk to you
3. Download new Evox from different sites - may be yours is corrupted
4. Downlaod Slayers 2.5 form IRC - see what happens when you burn
5. Get me - I could send it to you but the problem I stayed Very South East Part of The
World!! Singapore!
6. Give up - forget all this never happen

achysklic · « **Reply #12 on:** January 06, 2004, 07:42:00 AM »

finally got it working thaks everyone for the reply now get this i am using nero 6 ultra to burn with i was burning just as the tut stated making all the setting ident. it was no go as all of you have read for past several days ......so i finally decided to try something different i burned the cd using nero startsmart and it worked i have made 4 copies of evox and slayers this way and everyone loads perfect the first time never would i have dreamed something so simple could be so wrong hope this solution my help other dummies like me

maxsee · « **Reply #13 on:** January 06, 2004, 08:24:00 AM »

QUOTE

Dont give up keep trying - get a virgin (brandnew) CDRW again - go back and check all your steps carefully

Good To Hear YOU finally Get It! - Enjoy Dude!!!

NEVER GIVE UP NEVER SURRENDER!!!!
(NEW XBOX MOTO FOR EVOX) LOL!!

Author Topic: Help Loading Evox (Read 28 times)