Topic: Evox 3935 Released (Read 337 times)

nyarrgh · « **Reply #15 on:** April 29, 2004, 09:56:00 AM »

if you're using a crossover cable, then that "USE STATIC IP" should be yes, unless you have a DHCP server running on your PC.

If the IP Address on your PC is 192.168.0.1 , and the sub net mask is 255.255.255.0 , then you should change the IP address of your xbox to something like 192.168.0.xxx (eg 192.168.0.10) having the three "255"'s there means it can only see IP addresses with the same value for the first three numbers.

save and exit, then you'll probably have to reboot the xbox.

having blank values in the network information may mean either
1) you're connecting the cable straight from the XBOX to the PC and it's not really a crossover cable
2) broken cable
3) and this is the most probable,... you turned on the xbox before connecting the cable. The cable should be connected and active(The other end should already be connected also, and the PC turned on) when you turn on the xbox.

scott_b · « **Reply #16 on:** May 03, 2004, 01:49:00 AM »

gman896 · « **Reply #17 on:** May 10, 2004, 11:39:00 AM »

Set your clock in MS Dash

twicked · « **Reply #18 on:** June 01, 2004, 04:21:00 AM »

Okay, this may sound newbish, but I guess I'm sort of a noob again anyway. Its been at least 6 months since I've been in f.x-s, so, here goes:

Apparently the dash update fixed the FTP problems... okay. I had a dash once (about ... 1 year, 1.5 years ago) and it was flawless and the IGR worked (seemingly fine (except on HALO)) but I've updated 3 or 4 times since.

When I FTP to my computer (saving games) via FlashFXP after about 20 mins, it times out. Last night I downloaded 3935 and replaced all my evox files and rebooted, fixed the IP configurations and whatnot through the INI ...

Anyhow, point is, that my downloads to the computer still time out and the xbox needs to reboot again.

This didn't happen a year ago, but... wtf? Anyhow, I would seriously appreciate some help -- I dont want a 2 hour job to last 4 days.

-twicked

edit: Also, I just pasted the evoxdash.xbe and the .ini over the origionals... do I still have to load the bios?

pops69 · « **Reply #19 on:** June 26, 2004, 09:57:00 AM »

H: i have an no chip mod x box running the bert and ernie in the fonts folder with an older version of evol x. i did an upgrade to 3935 but without a cd it boots to the green screen of death. It will run the 3935 if i run it thru the mechw save game fine, even does the dvd copy. A couple of questions with respect to this upgrade. I removed the default.xbe from the c drive and replaced it with the evoxdash.xbe. I also removed the burt and ernie xtf from the fonts folder. Do i still need them and should i put the default.xbe back on the c drive. also with respect to the bios and skin folders, do they need to be put on the xbox c drive as well. appreciate any help you can give on the subject, as i could not find any tut with respect to this type of upgrade.

ps. just tried putting the bert and ernie back in the fonts folder, boots to green of death with no cd loaded, so i removed them again.

also tried to have both the default.xbe and evoxdash.xbe in the root of the xbox hd and the evolx would not boot at all just kept rebooting itself.

again the 3935 upg boots up fine using the mecha load linux fine and looks like its pulling the info from the evox.ini on my xbox c drive

mc_365 · « **Reply #20 on:** July 01, 2004, 07:07:00 PM »

captlu · « **Reply #21 on:** July 18, 2004, 10:22:00 PM »

hey all
so this is the latest evox dashboard that has come out?

Thanks for help!

xnike2livx · « **Reply #22 on:** July 25, 2004, 11:04:00 AM »

does this version fix the clock loop error?

Grendal · « **Reply #23 on:** July 31, 2004, 11:02:00 AM »

I read somewhere in here that the FTP problems were fixed in 3752, but I've had nothing but trouble with this version. The old version has not denied me access a single time, but with 3935 about 70% of the time it will let me connect, but doesn't let me view anything.

i.e. it lists all the partitions but when I try to open one it says "action not taken" or something like that. To make it work, I have to restart FlashFXP and my Xbox several times, and sometimes it works and usually it doesn't.

I've been running Avalaunch as my primary dash because it has a much more reliable FTP and just looks a lot cooler, but every now and then I need Evox for something and it won't work. I'd switch back to 3752 but it doesn't support a G partition so I can't. Avalaunch's only problem is that it uses the X and Z cache so Halo hacking is difficult at best with it.

I'm using a v1.4 box and the Xecuter 4981 bios that's been customized with XBtool and the flubber changer program.

damnmyxbox · « **Reply #24 on:** July 31, 2004, 06:48:00 PM »

damnmyxbox · « **Reply #25 on:** July 31, 2004, 06:49:00 PM »

damnmyxbox · « **Reply #26 on:** July 31, 2004, 07:01:00 PM »

GoldStar · « **Reply #27 on:** August 02, 2004, 02:28:00 PM »

I'll have to say that not all bugs have been worked out from this latest release..I still have trouble when uploading a backup of my original C: drive..Good work though!!

toymachine2009 · « **Reply #28 on:** September 25, 2004, 11:37:00 AM »

what do u all mean there is a new evox or something if there is how do u replace it with the new one

toymachine2009 · « **Reply #29 on:** September 25, 2004, 11:38:00 AM »

how much can an 80 GB hold cant it hold like 60 xbox games

Author Topic: Evox 3935 Released (Read 337 times)