Topic: How I Use The Rest Of My Hd (Read 131 times)

MadInsane · « **Reply #15 on:** September 23, 2003, 11:57:00 PM »

DAAAAAAAAMMIT!! Something isnt working right.. it says the drive has been formatted, but under evox it still says 0 free space... and under flashfxp if i click "make folder" the folder doesnt appear.. WTF. Has ANYONE gotten these raw commands to work under ftp, because I really want to get it formatted this way, i have way to much to lose on my precious f: drive.. 160 gigs here we come...

MadInsane · « **Reply #16 on:** September 25, 2003, 02:58:00 PM »

UPDATE!! my shit is now working... turns out when i accidentally converted my 4977 bios to 1 meg BEFORE patching lba48 to it. THIS IS INCORRECT METHOD OF PATCHING... bah. I am very happy now 160 gigs for that ass!!

thepro8 · « **Reply #17 on:** September 29, 2003, 08:46:00 PM »

Ok I patched a x2 4977 bios with the lba48 patch, I chose "partition 6 takes up to 137, partition 7 takes the rest" I left "Ignore hard drive partition table" UNCHECKED. made it 1 meg (i'm using a x2 lite)

I flashed my chip and that went fine.

I update to the new evox dash. I added in "UseGDrive = Yes" I formatted my partition 7 using raw commands, and G folder now shows up when I FTP in or look at it from the system settings.

The problem is, the system management settings shows G: to have size 0. and I tried to ftp a file to the G drive and it won't allow any files to be stored there.

Anyone know what I did wrong???

GuySmily · « **Reply #18 on:** September 29, 2003, 09:56:00 PM »

The only thing I can think of is.. Is your hard drive big enough to use this?

thepro8 · « **Reply #19 on:** September 29, 2003, 09:29:00 PM »

yeah i have a Maxtor 200 gig special edition

Madinsane and others have had the same problem, but i can't get mine to work. here is the link of another topic i have been following topic

heinrich · « **Reply #20 on:** September 30, 2003, 07:37:00 AM »

Why dont you explain what you did try, and we can go from there. I have done it on several xbox's/hard drives. It works fine.

heinrich · « **Reply #21 on:** September 30, 2003, 07:41:00 AM »

QUOTE (Drew826 @ Sep 23 2003, 03:54 AM)

try the command without the single quotes:

Formatdrive 03BE8032

Ya, you are not supposed to use the quotes, but you cant use that same key again.
Everytime you give it the "Formatpath" command, you will get a NEW KEY. Once you use "Formatdrive", that key is no good. What olftboy said to do it is exactly right. (minus some \)

Formatpath \Device\Harddisk0\Partition7
you receive a number back from the query, use
this number in the following command

FormatDrive 'the number' (no quotes)

heinrich · « **Reply #22 on:** September 30, 2003, 07:09:00 AM »

QUOTE (thepro8 @ Sep 30 2003, 12:46 AM)

I update to the new evox dash. I added in "UseGDrive = Yes" I formatted my partition 7 using raw commands, and G folder now shows up when I FTP in or look at it from the system settings.

The G folder shows up when you set "UseGDrive = Yes", NOT when you format. So just because that folder is there, does not mean you have a G drive.

heinrich · « **Reply #23 on:** September 30, 2003, 07:11:00 AM »

QUOTE (MadInsane @ Sep 25 2003, 06:58 PM)

UPDATE!! my shit is now working... turns out when i accidentally converted my 4977 bios to 1 meg BEFORE patching lba48 to it. THIS IS INCORRECT METHOD OF PATCHING... bah. I am very happy now 160 gigs for that ass!!

Optimally, you do this all in one step. Open the 256k bios in xbtool, check LBA48, and 1024k for the size, and save.

thepro8 · « **Reply #24 on:** September 30, 2003, 08:37:00 AM »

Ok I got mine working..here is what went wrong...hopefully others can learn from my mistake.

When I went to format my HD I used a command posted earlier. It was Formatpath DeviceHarddisk0Partition7

That returned a number, but it must have been wrong. I followed heinrich's advice and used Formatpath \Device\Harddisk0\Partition7

And that did the trick..Thanks a ton guys.

heinrich · « **Reply #25 on:** September 30, 2003, 08:39:00 AM »

OK guys, the board does not like backslashes, in order for a \ to show up, you must type: \\

mindspenk · « **Reply #26 on:** September 30, 2003, 02:33:00 PM »

Sorry, one last thing;
Is there a bios that you don't have to open and change information around in to get this to work? Can someone explain again what needs to be done in the bios to get this to work?

r0c · « **Reply #27 on:** November 12, 2003, 03:56:00 PM »

hey fellas, i tried the command got my key, then used the [formatdrive key]. flash says drive formatted.
i still see 0 in the g: drive.
i see it in flash as g: , just cant ftp anything to it.

Author Topic: How I Use The Rest Of My Hd (Read 131 times)