Topic: Evox 3921 - Hd Temp (Read 253 times)

kidrich22 · « **Reply #45 on:** September 28, 2003, 04:14:00 PM »

aaron1974 does that show the space on G
or does that set the hdd temperature in skin
simple answer to the question jamal asked wouldn't be
hard to do get a hold of your ego

gto65l · « **Reply #46 on:** September 28, 2003, 05:50:00 PM »

all of the texts in aaron's post are for space available. There aren't any temp displays. You need something like:

Text = 46,127,0.5,0x0000A0,0,"HDD:<temp3>

It will either give you a number reading or N/A.

gto65l · « **Reply #47 on:** September 28, 2003, 09:55:00 PM »

This is out of the evox.ini? In that case you will only see your HDD temp in the origional skin. BTW I just cut and pasted from the earlier post of what it should look like as an example. Paste this over those first two lines, and delete the example line I gave you:

Text = 30,37,0.5,0x000000,0,"<Time><CrLf>MB Temp <Temp1><CrLf>CPU <Temp2><CrLf>HDD <Temp3>"
Text = 28,39,0.5,0x808080,0,"<Time><CrLf>MB Temp <Temp1><CrLf>CPU <Temp2><CrLf>HDD <Temp3>"

This will list HDD in the corner with the other temps. This should work as you said the HDD temp showed a reading in the settings.

REMEMBER:This will only show the temp in your origional skin, you must add it to your other skins if you want the reading to show up there.

]zebra[ · « **Reply #48 on:** September 30, 2003, 01:43:00 AM »

This is my smartctl in my xbox:
Home root # ./smartctl -c /dev/hda
Device: SAMSUNG SV1204H Supports ATA Version 6
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.
Home root # ./smartctl -v /dev/hda
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst Threshold Raw Value
( 1)Raw Read Error Rate 0x000a 100 100 000 5
( 4)Start Stop Count 0x0032 100 100 000 22
( 5)Reallocated Sector Ct 0x0033 253 253 009 0
( 7)Seek Error Rate 0x000b 253 253 051 0
( 8)Seek Time Preformance 0x0024 253 253 000 0
( 9)Power On Hours 0x0032 100 100 000 13012
( 12)Power Cycle Count 0x0032 100 100 000 15
(194)Temperature 0x0022 160 139 000 310
(197)Current Pending Sector 0x0033 253 253 009 0
(198)Offline Uncorrectable 0x0031 253 253 009 0
(199)UDMA CRC Error Count 0x000a 100 100 000 0
(200)Unknown Attribute 0x000b 100 100 051 0
(201)Unknown Attribute 0x000b 253 253 051 0

Does anyone have an idea why it shows 160??
It is an 5400rpm 120GB Samsung.

I moved the original 10GB Seagate to my linux server.
Here is it's smartctl:
[root@zebra root]# smartctl -c /dev/hdc
Device: ST310014A Supports ATA Version 6
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.
[root@zebra root]# smartctl -v /dev/hdc
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 10
Attribute Flag Value Worst Threshold Raw Value
( 1)Raw Read Error Rate 0x000f 097 091 025 232599998
( 3)Spin Up Time 0x0003 097 097 000 0
( 4)Start Stop Count 0x0032 100 100 020 0
( 5)Reallocated Sector Ct 0x0033 100 100 036 0
( 7)Seek Error Rate 0x000f 065 060 030 3217083
( 9)Power On Hours 0x0032 100 100 000 178
( 10)Spin Retry Count 0x0012 100 100 000 0
( 12)Power Cycle Count 0x0032 100 100 020 120
(194)Temperature 0x0022 041 050 000 41
(195)Hardware ECC Recovered 0x001a 100 253 000 0
(197)Current Pending Sector 0x0012 100 100 000 0
(198)Offline Uncorrectable 0x0010 100 100 000 0
(199)UDMA CRC Error Count 0x003e 200 200 000 0
(200)Unknown Attribute 0x0000 100 253 000 0
(202)Unknown Attribute 0x0032 100 253 000 0

The value of 41 degrees celcius is very likely

I also have an 120GB Maxtor hd in ther linux server:
[root@zebra root]# smartctl -c /dev/hdg
Device: Maxtor 4G120J6 Supports ATA Version 6
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.
[root@zebra root]# smartctl -v /dev/hdg
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst Threshold Raw Value
( 3)Spin Up Time 0x0027 252 252 063 0
( 4)Start Stop Count 0x0032 253 253 000 0
( 5)Reallocated Sector Ct 0x0033 253 253 063 0
( 6)Read Channel Margin 0x0001 253 253 100 0
( 7)Seek Error Rate 0x000a 253 252 000 0
( 8)Seek Time Preformance 0x0027 253 252 187 46172
( 9)Power On Hours 0x0032 253 253 000 4842
( 10)Spin Retry Count 0x002b 252 252 223 0
( 11)Calibration Retry Count 0x002b 252 252 223 0
( 12)Power Cycle Count 0x0032 253 253 000 50
(192)Power-Off Retract Count 0x0032 253 253 000 0
(193)Load Cycle Count 0x0032 253 253 000 0
(194)Temperature 0x0032 253 253 000 0
(195)Hardware ECC Recovered 0x000a 253 252 000 11
(196)Reallocated Event Count 0x0008 253 253 000 0
(197)Current Pending Sector 0x0008 253 253 000 0
(198)Offline Uncorrectable 0x0008 253 253 000 0
(199)UDMA CRC Error Count 0x0008 199 199 000 0
(200)Unknown Attribute 0x000a 252 252 000 0
(201)Unknown Attribute 0x000a 253 252 000 0
(202)Unknown Attribute 0x000a 253 252 000 0
(203)Unknown Attribute 0x000b 253 252 180 0
(204)Unknown Attribute 0x000a 253 252 000 0
(205)Unknown Attribute 0x000a 253 252 000 0
(207)Unknown Attribute 0x002a 252 252 000 0
(208)Unknown Attribute 0x002a 252 252 000 0
(209)Unknown Attribute 0x0024 253 253 000 0
( 99)Unknown Attribute 0x0004 253 253 000 0
(100)Unknown Attribute 0x0004 253 253 000 0
(101)Unknown Attribute 0x0004 253 253 000 0

Very strange values from the Maxtor.

]zebra[ · « **Reply #49 on:** September 30, 2003, 05:42:00 AM »

I did som research on the net and found out a couple of things.
The different manufacturers have different meanings for the values.
I found this linux tool:
smartmontools

smartmontools-support

In my case does the samsung report the Raw Value 310. According to smartmontools that would mean 31.0 degrees celcius.

They have a quite good database of how some values have to be corrected.

heinrich · « **Reply #50 on:** September 30, 2003, 07:21:00 AM »

QUOTE (aaron1974 @ Sep 29 2003, 08:16 AM)

it has to be set to yes and the value of 194 for it to show(many with 40GB western Digital HDD's said it dun support HDD Temp and will display N/A or an extremly high number like 198C)if so try setting the

EnableSMART = Yes
HDD_Temp_ID = 9

it worked for some,give it a shot

lol, attribute 9 for S.M.A.R.T is "Power On Hours", this was discussed already, you should try SEARCHING

Ghettofreeryder · « **Reply #51 on:** November 12, 2003, 11:57:00 PM »

This means your hd doesnt have S.M.A.R.T. capabilities, basically, it lacks a temperature sensor

heinrich · « **Reply #52 on:** November 13, 2003, 03:17:00 AM »

heinrich · « **Reply #53 on:** November 13, 2003, 05:35:00 AM »

Pass · « **Reply #54 on:** November 16, 2003, 07:40:00 AM »

I have searched alot of threads and read alot, but still can't find the answer to my problem. Hopefully someone will help out a newbie. For some reason, I have been having a problem displaying all the temps in the settings and on the skins. I have ran the autoinstaller 2.5 and running the current evox. Too my knowledge, just by doing this I should have temperature readings in my settings/info but nothing is there. Any time i try to get the readings on the skin it shows up as: ENV ERROR! Im I doing something wrong? Did the settings not update or something? any help is greatly appreciated.

Pass · « **Reply #55 on:** November 16, 2003, 10:25:00 AM »

I accidently left one thing out that is a little weird. When i first turn on my xbox the light in the fron around the eject button is green as normal. But after usually about 10-20 minutes or so it goes Orange. It does not affect anything im doing but is this a error message of some sort?

THanks

Habs69M · « **Reply #56 on:** November 16, 2003, 02:18:00 PM »

I got a new Seagate Barracuda 120 gig my hd temp is comparable to my old 60 gig seagate at 34 C

But sometimes my temp will vary for 2 or 3 seconds and come back to 34 C, will go at 0.0 C , 17 C , 25 C , and 222 C , just wondering if anyone else got this, cause on my 60 gig it never did this.

Habs69M · « **Reply #57 on:** November 18, 2003, 04:53:00 PM »

ryrules1 · « **Reply #58 on:** December 06, 2003, 05:49:00 PM »

hey guys i have a maxtor 160GB 5400rpm hdd and when i set my skins to temp 3 and set smart on and set the hdd temp id to 9 it still didnt work does anyone know what they are for maxtor w/ 9 i am getting a 221 F temp lol please let me know asap

heinrich · « **Reply #59 on:** December 06, 2003, 06:07:00 PM »

QUOTE (ryrules1 @ Dec 6 2003, 09:49 PM)

hey guys i have a maxtor 160GB 5400rpm hdd and when i set my skins to temp 3 and set smart on and set the hdd temp id to 9 it still didnt work does anyone know what they are for maxtor w/ 9 i am getting a 221 F temp lol please let me know asap

WHY are you setting it to 9?
9 is NOT the temp!

Author Topic: Evox 3921 - Hd Temp (Read 253 times)