Topic: Upgradding To 3921? (Read 124 times)

heinrich · « **Reply #15 on:** September 16, 2003, 10:01:00 AM »

QUOTE (Booger Bob @ Sep 16 2003, 01:12 PM)

When i first saw the news about a new evox i downloaded it an put it on my xbox, i just now realixed that it was a beta but i have had no problems

Maybe you missed my earlier post...
They are all called BETA

458 was beta, all the rest, I forget the #'s were BETA, 3752 was BETA, and 3921 is BETA, they are all called that.

Spunky93 · « **Reply #16 on:** September 16, 2003, 06:18:00 PM »

I installed 3921 to by box. Rebooted and it flashes the xecuter2 logo and reboots. If I put 3752 back on all returns to normal.

Anybody got any suggestions?

wolverinegod · « **Reply #17 on:** September 16, 2003, 06:24:00 PM »

Hey Heinrich,
with all the reads on this one would you either pin this or maybe pin a new topic with the info you provided!

There we go!

chinmi · « **Reply #18 on:** September 16, 2003, 06:58:00 PM »

what evox.ini that u use ?? the old 3752 ?? or the new one supplied with the 3921 ??

Spunky93 · « **Reply #19 on:** September 16, 2003, 06:59:00 PM »

New one.

3921 will boot from CD but not from hard-drive.

b01 · « **Reply #20 on:** September 16, 2003, 07:50:00 PM »

heinrich · « **Reply #21 on:** September 16, 2003, 10:26:00 PM »

QUOTE (b01 @ Sep 16 2003, 11:50 PM)

wolverine and h3, a new EvoxD6+ Bios comes with the new Evox dash rar. It is a 256K BIOS, so if you have a 1MB chip, use xbTool to convert it to a 1MB BIOS. Just flash your chip with that BIOS and you won't have to worry about patching any BIOS ,as that one is already patched.

Have you personally verified this? I dont see anything that says that d.6+ has LBA48 support. And if it does, is it for a large F drive or a 7th partition? Does it ignore the partition table on disk?

Also, if you give evox a 256k bios to flash on a 1mb chip, it will write it 4x, no need to resize.

Spunky93 · « **Reply #22 on:** September 17, 2003, 03:21:00 AM »

^ Bump

chinmi · « **Reply #23 on:** September 17, 2003, 09:07:00 AM »

Spunky93 · « **Reply #24 on:** September 17, 2003, 10:20:00 AM »

But the new .ini file and 3921 work just fine from a CDRW. Shoudn't they work fine from the HD?

Could it be something in the fact that the HD was formated under the older version of the dashboard?

chinmi · « **Reply #25 on:** September 17, 2003, 06:43:00 PM »

all i need to add to my old evox.ini 3752 is the line to enabled the S.M.A.R.T feature

Cannibalistic · « **Reply #26 on:** September 18, 2003, 07:04:00 AM »

Are you guys saying that in order to use this new version of EvoX, we need to flash the BIOS?

What about me (and other users) who have non-flashable MOD chips in their system?

I have an origianl eXecuter v1.0 on my v1.0 XBox system.

What am I supposed to do then?

Thanks in advnace.

heinrich · « **Reply #27 on:** September 18, 2003, 07:20:00 AM »

QUOTE (Cannibalistic @ Sep 18 2003, 11:04 AM)

Are you guys saying that in order to use this new version of EvoX, we need to flash the BIOS?

What about me (and other users) who have non-flashable MOD chips in their system?

I have an origianl eXecuter v1.0 on my v1.0 XBox system.

What am I supposed to do then?

Thanks in advnace.

No, you dont need to flash your bios.
Evox will run as it always has.

heinrich · « **Reply #28 on:** September 18, 2003, 09:50:00 AM »

thomes08 · « **Reply #29 on:** September 20, 2003, 06:12:00 PM »

i want to upgrade my dash. Can i just ftp and put the new evox files on my c drive replacing the old ones and adding any additional ones?
thanks

thomes08

What's the difference with this new dash other than being able to support drive g

Author Topic: Upgradding To 3921? (Read 124 times)