Topic: Evox Not Allowing Ftp Into D: Drive? (Read 196 times)

SpYdErWeB · « **on:** March 10, 2004, 02:23:00 PM »

This thread has been going for months and a fix has still not been found. I'm having a problem with a v1.4 K: 5530 EvoX: 3752 and 3953, which is not running a haked BIOS so that takes care of the different BIOS problems. Besides the D: mirroring the C: drive, when attempting to open the D: in xToolBox or DVD2XBox I get a "video_ts"" folder instead. Can anyone find a fix for the FTP problem and then help me with this crazy "video_ts" thing, I think they are related.

blinky8225 · « **Reply #1 on:** March 11, 2004, 11:09:00 AM »

the problem is with x select and it can't be fixed
the problem is when x select boots something it mounts it to the d drive automatically so if you want to view your d drive boot your dash straight from the harddrive not with x select

cornflake · « **Reply #2 on:** March 21, 2004, 12:42:00 PM »

The Video_TS folder contains a small video so when you put it in a normal dvd drive a video will play saying this is an xbox game. Its only about 11 megs. I am also having a problem with my d drive mirroring my c drive. I am using the standard bios and don't plan on flashing it. I can do everything I want to right now except see my d drive. If anyone has any suggestions, that would be great. Thanks,

Cornflake

addicted_to_box · « **Reply #3 on:** July 29, 2004, 01:07:00 AM »

I had the same problem with the D:\ drive mirroring the C:\ drive. After I updated my Bert and Ernie fonts to "ernie_and_bert_reloaded" the problem stopped. However, I still have the problem of EvoX thinking that original game discs are video dvds, and the only thing that shows up on the disc when I browse it with boXplorer is the Video_TS folder.

But I did notice (before I updated the fonts) that if I had a game disc in the drive and the xbox went into a clock loop, when it got out of the clock loop, it was able to read the disc properly.

EvoX v. 3935
Kernel v. 1.00.3944.01
MS Dashboard v. 1.00.4034.01

RacerX · « **Reply #4 on:** September 12, 2003, 08:17:00 PM »

I have an odd problem, I think...
I successfully modded, installed evox, installed new Maxtor 120gb hdd, and got my backed-up C: and E: onto the new hdd. However, whenever I ftp in with FlashFXP, and access my xbox's D: drive, it shows me the contents of the C: drive under the D: heading. I have uploaded nonsense files into C: to make sure, and sure enough, I then see them in D: too. Any idea why I can't access the contents of the DVD drive? Help would be much appreciated.

xtc · « **Reply #5 on:** September 12, 2003, 08:49:00 PM »

Your not the only one. I had the same problem after changing hard drives. Then after reading your post I decided to check on it again and to my amazement it now works! But I had the exact same problem drive d: contents were identical to the c: when I ftp to it. The only thing I did reciently was I added the G: drive support patch.
but i don't know what fixed it. I can tell you that I did not reflash my bios in a long time so that was'nt the problem - I think its dash related

RacerX · « **Reply #6 on:** September 13, 2003, 05:32:00 AM »

The G: drive support patch, eh? Do you think that had anything to do with it, or do you think it was just a fluke? I'm running evox 1.3752, anyone know any known issues with it?

arwiD · « **Reply #7 on:** September 13, 2003, 08:55:00 AM »

xbox d: drive = dvd-rom

xtc · « **Reply #8 on:** September 13, 2003, 09:47:00 AM »

No I don't think the G: support patch fixed it. The only reason why I mentioned it was that was the only thing that I recall doing before I noticed it working again. I am running evox 3752 also so you should be able to get it to work. Try reinstalling the dash, try using DHCP if your not already. All I can say is I didnt intentionally try to fix it, but I was delighted to see it working again after reading your post.

sage_of_darkness · « **Reply #9 on:** September 14, 2003, 07:57:00 AM »

i'm having the same problem, except mine is using the fonts exploit. some of the files are different, c and d, but they have the same basic structure. I NEED HELP!!!!

hydrocardiac · « **Reply #10 on:** September 15, 2003, 02:14:00 AM »

Quote

whenever I ftp in with FlashFXP, and access my xbox's D: drive, it shows me the contents of the C: drive under the D: heading

Hmm...im having this exact same problem,but when i go into boxplorer and check the contents of D: it will actually show the dvd contents instead of the C: contents.Its only flashfxp thats seems to be the problem or ftp problem with me,im using the standard hdd too so i never changed very much stuff on me hdd either.
Anyone have an idea?i think it would be a simple solution..

doggy_dogg · « **Reply #11 on:** September 15, 2003, 06:28:00 AM »

I always thought that D: was the DVD-ROM drive.

If it's not, which drive is?

fOZf8 · « **Reply #12 on:** September 15, 2003, 05:56:00 AM »

D: IS the dvd-drive, you're probably looking at your evox boot disc, or whatever disc is in there...

hack5t3r · « **Reply #13 on:** September 16, 2003, 05:22:00 AM »

No this definetly is a problem, if anyone has any suggested work arounds, please post and I will give them a go.

hydrocardiac · « **Reply #14 on:** September 17, 2003, 03:03:00 AM »

Apparantly its a problem with the x2_4978.03 bios, u have to revert back to x2_4977 to fix the problem.i currently have x2_ 4978.03 thats why i have the problem,but i dont want to flash back to 4977.Does anyone know a workaround other than flashing the bios? And also is there anybody using x2_4978.03 and does not have this problem?

Author Topic: Evox Not Allowing Ftp Into D: Drive? (Read 196 times)