Topic: Ftp Into Evox Problem (Read 32 times)

BirdofPrey · « **on:** July 26, 2003, 02:47:00 PM »

My problem is when im set up to ftp into evox, as soon as i turn on my xbox, windows give the message " there is a conflict with ip address 192.168.0.2 and a device having address 00:xx:xx:xx:xx (xbox mac address), interface has been disabled" I used to be able to ftp just fine? any help apprieciated, thanks.

vidgms4me · « **Reply #1 on:** July 26, 2003, 03:09:00 PM »

This usually means that your computer has the same ip as the xbox. Try using dhcp on the xbox.

BirdofPrey · « **Reply #2 on:** July 26, 2003, 03:38:00 PM »

cant say im familiar with using dhcp, in fact i dont even know what it stands for, but i should be able to do it the way i was before? im using the exact same method, does anybody know much about network settings? im stumped, got lots of goodies just waitin to go on the box... im running windows ME. plzzzzz help

mrRobinson · « **Reply #3 on:** July 26, 2003, 06:01:00 PM »

pretty simple. whatever you feel most comfortable with. either change the ip of your computer or your xbox to 192.168.0.3

WodMan · « **Reply #4 on:** July 26, 2003, 06:17:00 PM »

QUOTE

This usually means that your computer has the same ip as the xbox. Try using dhcp on the xbox.

This will not work if you do not have a router or other device that can act as a dhcp server.

QUOTE

pretty simple. whatever you feel most comfortable with. either change the ip of your computer or your xbox to 192.168.0.3

That'll work.

BirdofPrey · « **Reply #5 on:** July 26, 2003, 07:46:00 PM »

I still cant get it to work, before all I would do is go into the network settings and specify ip address of 192.168.0.2, then put that same ip in flashfxp and all was good, now i get that windows message. so if i change the ip on the computer to 192.168.0.3, dont I have to do the same for the xbox? Anyways i tried all combinations, .3 on both, .3 on computer and .2 on box, still no joy. What settings will work between xbox/computer and flashfxp? thx in advance.......

WodMan · « **Reply #6 on:** July 26, 2003, 08:05:00 PM »

When you have it setup properly with a different IP for each the box and the pc you should be able to ping the xbox from your PC. Just go to a command prompt and type ping 192.168.0.3 (if that is the current IP of the xbox). If you get a reply then you know that you do not have a network problem. If you get a request timed out message then you have another problem, possibly a bad cable connection.

weirdo118 · « **Reply #7 on:** July 26, 2003, 08:38:00 PM »

birdofprey.. just go into your network settings and change the gateway and subnet mask to something and make some Ip address... then go to your xbox network settings and change it all to the same stuff except with a different Ip... that shoudl get it going

BirdofPrey · « **Reply #8 on:** July 26, 2003, 09:27:00 PM »

Im such a noob, i did all your guys settings, still wouldnt work, then it occured to me that it stopped working when I installed my new firewall, disabled it and off I go, thanks for all the help, you guys r cool.

BirdofPrey · « **Reply #9 on:** July 27, 2003, 12:22:00 AM »

thanks trob

ps, I like your controller mod, too bad those old school ones are so damn hard to use.

Author Topic: Ftp Into Evox Problem (Read 32 times)