Topic: Games Transfer, But Wont Load!?!? Help (Read 39 times)

Kypreos · « **on:** June 08, 2003, 07:10:00 PM »

Here's a dumb question... how much space do you have left on your hard drive? Make sure you have enough before transfering games over.

luther349 · « **Reply #1 on:** June 08, 2003, 07:47:00 PM »

use xbcopy it auto patches ya games. and everygame i did with it works fine.

rahula · « **Reply #2 on:** June 08, 2003, 10:08:00 PM »

Yap...check the space on your E and F

I use Px HDD loader v 1.1a and works really great. You can also use xbcopy too. they both works flawlessly. If you are loading a game from binary news group make sure you have a complete game.

smcculloch · « **Reply #3 on:** July 08, 2003, 05:49:00 AM »

I use xbcopy and every game I seem to do resets the game back to EvolutionX?

Any Ideas? I have disabled all IGR flags in evox.ini

roar · « **Reply #4 on:** July 08, 2003, 07:00:00 AM »

When a game won't load, ask yourself 2 questions before asking here...

Those would be...

What bios am I running? It should be 4976.02 or greater

Do I have Evox's IGR's turned off in all 3 places? The answer to this should be YES

If it is not either of these two questions and the game in question is any other game other then enter the matrix your game DID NOT copy properly, do it again, make sure you are working from an original and make sure the total files copied and the size copied are the same as what made it to your xbox.

rameysblackbelt · « **Reply #5 on:** July 08, 2003, 07:30:00 AM »

i have the bois 4799.02 and its not all games that does that aonly some example most but i can do the free one that came with the system 2 games on 1 dvd.

rameysblackbelt · « **Reply #6 on:** July 08, 2003, 02:15:00 PM »

i found my problems i had 2
1 was i have the ecuter 2 lite chip which has the old bios from modchip.ca but i thought i was flashing it but i still had the protection plug on place f on the chip this will make the chip non flasable so i reoved it and reflashed it with the dvd i have and bingo it worked . also i went into the settings in evolution x and set my settings all 3 where it says (in game reset) all three of these had to be switched to off , it is best
to use th dvd i have that has evolution x and new bios for chips also remember to put the plug back on incase you rent a game that comes out that will erase your bios , that is what the protection is for , email me if i can help anyone united we stand heheheh :evil:

roar · « **Reply #7 on:** July 08, 2003, 02:30:00 PM »

QUOTE (rameysblackbelt @ Jul 8 2003, 06:15 PM)

also remember to put the plug back on incase you rent a game that comes out that will erase your bios , that is what the protection is for , email me if i can help anyone united we stand heheheh

Who the heck told you that? Oh jeez.

chevy · « **Reply #8 on:** July 08, 2003, 05:44:00 PM »

I downloaded XBcopy 0025 .I have "media", changes.txt" and default.xbe.

How do Install XBcopy?

I have never been able to find a tutorial on editing evox.ini.

smcculloch · « **Reply #9 on:** July 08, 2003, 07:36:00 PM »

QUOTE (roar @ Jul 8 2003, 04:00 PM)

When a game won't load, ask yourself 2 questions before asking here...

Those would be...

What bios am I running? It should be 4976.02 or greater

Do I have Evox's IGR's turned off in all 3 places? The answer to this should be YES

If it is not either of these two questions and the game in question is any other game other then enter the matrix your game DID NOT copy properly, do it again, make sure you are working from an original and make sure the total files copied and the size copied are the same as what made it to your xbox.

Thanks Roar, I am updating my BIOS tonight, I still have the original that came with my X2Lite.

Author Topic: Games Transfer, But Wont Load!?!? Help (Read 39 times)