xboxscene.org forums

Author Topic: Helpppppppppppppppp  (Read 21 times)

Canibusss_19

  • Archived User
  • Newbie
  • *
  • Posts: 3
Helpppppppppppppppp
« on: May 28, 2003, 09:04:00 AM »
Ok first off I got a X2pro and 80gb maxtor hd

Now heres the story, I was playign ncaa 2k3 basketball off hd and it froze, so i shut the power off my xbox, when i booted it back up i got a error screen for evox, error 13, Ok then i switch to original bios and try to load that, i get a xbox needs service error call consumer support, I tried booting a evox burned on dvd-rw, wont boot, gives me error 16 when I try to boot a disc, weird thing is last night it booted off cdrw but was real slow and i could not connect via ftp

Also the xbox light flashes green and red

WHAT IS GOING ON HERE  :(

This post has been edited by Canibusss_19: May 28 2003, 04:06 PM
Logged

kkattfish

  • Archived User
  • Hero Member
  • *
  • Posts: 1022
Helpppppppppppppppp
« Reply #1 on: May 28, 2003, 09:37:00 AM »
did you solder in the x2 pro or use the pogo pin adapter??  if you soldered, one of the connections may have come loose, check your soldering.  if you used pogo's then it probably just came unaligned.  
Logged

Canibusss_19

  • Archived User
  • Newbie
  • *
  • Posts: 3
Helpppppppppppppppp
« Reply #2 on: May 28, 2003, 01:06:00 PM »
I got no clue since I had someone else do it, but I guess I will contact them and see if they can fix it

Logged

kkattfish

  • Archived User
  • Hero Member
  • *
  • Posts: 1022
Helpppppppppppppppp
« Reply #3 on: May 30, 2003, 12:10:00 AM »
QUOTE (Canibusss_19 @ May 28 2003, 12:30 PM)
I got no clue since I had someone else do it, but I guess I will contact them and see if they can fix it

or you could open the xbox and just see if the chip is soldered in or not.  that is if you can't get a hold of the person.  
Logged