xboxscene.org forums

Author Topic: Evox D6 Ef  (Read 30 times)

FLScubaDiver

  • Archived User
  • Newbie
  • *
  • Posts: 2
Evox D6 Ef
« on: April 02, 2003, 10:01:00 AM »
First off, Slayers Auto Installer is great.

Matrix Mode 3 Evox D6 EF; EvolutionX Dashboard 1.8.3682..

I was having a problem With Evox D6 when ejecting an original game I would get an error 21 and the LED would flash red and green.

I downloaded and flashed my Matrix with D6 EF(eject fix). This fixed the eject issue but now the game doesn't stop, hence no dashboard, and the Matrix chip will not switch off.

I have reflashed my Matrix with red and blue D6EF with the same results.

I know the Matrix needs to be off to play Live so you don't get banned. This is my only concern.
If I can't resolve this then I will install an external switch for the Matrix.

Anyone having this issue? How did you fix it?
Logged

w m z

  • Archived User
  • Hero Member
  • *
  • Posts: 628
Evox D6 Ef
« Reply #1 on: April 02, 2003, 10:08:00 AM »
QUOTE (FLScubaDiver @ Apr 2 2003, 05:25 PM)
I downloaded and flashed my Matrix with D6 EF(eject fix). This fixed the eject issue but now the game doesn't stop, hence no dashboard, and the Matrix chip will not switch off.

I have reflashed my Matrix with red and blue D6EF with the same results.

I read this somewhere . . .

When you put your Matrix in Mode 3 and press eject during a game, the modchip is disabled.
Thus, you can not run homebrewed software.

I believe that ejectfix BIOSES do not work with Mode 3. Get a non-eject fix BIOS.
Logged

theanus

  • Archived User
  • Newbie
  • *
  • Posts: 5
Evox D6 Ef
« Reply #2 on: April 02, 2003, 10:37:00 AM »
You need to lock your hard drive.
Logged

FLScubaDiver

  • Archived User
  • Newbie
  • *
  • Posts: 2
Evox D6 Ef
« Reply #3 on: April 02, 2003, 11:52:00 AM »
When I use non-eject fix bios I get error 21 and the LED flashes red/green.

Locked the hard-drive and am having the same issue.

Logged