Topic: X2pro-evox: Connection Problem (Read 24 times)

Ill187 · « **on:** March 19, 2003, 10:30:00 PM »

Have you tried releasing and renewing your ipconfig.
That's worth a shot! Try to get a halo party going! That'll tell if it's the box or not. Other than that I've got nothing for ya!

likwidsix · « **Reply #1 on:** March 19, 2003, 11:05:00 PM »

and by the looks of it, halo system link WOULD work, will be testing friday night w/ another xbox

the option is not faded and allows me to create a game or wait to find one being made

skoda1800 · « **Reply #2 on:** March 20, 2003, 06:56:00 AM »

Static and dynamic ip dont seem to work

blingbling · « **Reply #3 on:** March 20, 2003, 07:10:00 AM »

have u tried this...... it worked for me

set ip on xbox to static
default gateway 192.168.0.1
and make your IP 192.168.0.3
subnet mask 255.255.255.0

now on your pc go to Local Area connection,(the 2 computers down the bottom right corner on task bar) click on properties then click on properties for TCP/IP and change the ip to 192.168.0.1 and the subnet mask to 255.255.255.0 now when u boot evox and run FlashFXP (or whatever ftp) from pc do quick connect then 192.168.0.3 name xbox password xbox (or whatever password u made in evox.ini) and it should work..... sorry if i didnt explain right

froescheD · « **Reply #4 on:** March 20, 2003, 07:15:00 AM »

1. there's a good tutorial about how to connect directly from xp to xbox - have you checked it out?

2. there's another great tutorial to connect using a ftp program (flashfxp) - use this if it still doesn't work after you followed tutorial mentionned under point 1

likwidsix · « **Reply #5 on:** March 20, 2003, 10:45:00 AM »

erickpro · « **Reply #6 on:** March 20, 2003, 03:44:00 PM »

I cant erase files trough flashfxp... for some reason, when i hit the delete key or go to menu and delete a file in the xbox... it does not do anything....

this is weird....

blingbling · « **Reply #7 on:** March 20, 2003, 06:13:00 PM »

sorry man i've got nothing else...... if i find anything at all about this i will let you know

likwidsix · « **Reply #8 on:** March 21, 2003, 05:46:00 AM »

I have narrowed down the problem to either my Modchip, TSOP, or Motherboard.

I did this by taking my HD out and putting it in a friends box, maintaining the same settings and connected, and guess what, it works fine.

I have a damaged TSOP because i flashed a 256k bios to it, but does my X2Pro not bypass it completely? Could have also been my installer who put the chip in damaged the ethernet or something, but I get the greenlight on my ethernet port on the back of the XBOX and Evox recognizes that a 100/Full Duplex line is connected. Or It could be my bios, ive tried the latest Evox and Executer bioses so i doubt its that.

Suggestions always appreciated.

skoda1800 · « **Reply #9 on:** March 22, 2003, 05:24:00 AM »

I have finally got my xbox to connect to PC.

Use static ip but need to have username/password....

likwidsix · « **Reply #10 on:** April 05, 2003, 04:21:00 PM »

I have spoken with someone else who suggested to use the EEPROM of an XBOX that you know works. I took my cousins XBOX EEPROM and patched it over mine and still no connection. Once again I get a MAC Address, and IP and Line status in EVOX, but simply cannot connect.

Author Topic: X2pro-evox: Connection Problem (Read 24 times)