Topic: NEW! SlaYer's EvoX Auto-Installer V2.0! (Read 768 times)

R0GER_M007RE · « **Reply #255 on:** April 07, 2003, 11:39:00 AM »

QUOTE (wilpac @ Apr 7 2003, 03:34 AM)

Roger Moo7e
It could be that your rom names are too long

I checked it but thats not it

dunno what it is, could you try to get slayers install disk working with 4 emulators in the apps folder with every emu about 50 roms or more?

Also tried a other folder like: Emus and edited the evox.ini, but still only a few roms where copied, while if i check the dvdr in the dvdrom of the pc, it shows the roms are really there

SS113 · « **Reply #256 on:** April 07, 2003, 05:17:00 PM »

QUOTE (SigTom @ Apr 6 2003, 09:48 PM)

HI:

I came on over to this topic cause I already used the SLayer Auto-Install on my XBox and it worked great. But, I tried to get my buddys XBox to work, using X2Pro and Pogo Pins, just like mine, and couldnt get the box to pick up Chip when it was Flashed ( by X2BM) no matter what switch combos I used, always when to M$Dash. So, being the smarty pants I am, I brought his box ot my hous, popped my chip from my own XBox into his box, still MS Dash, treid to flash his chip from MY XBox, still MS Dash, put my X2 Pro back in my box, and guess what, my chip wont work now, only goes to MS Dash when chip is off, XBox FRAGS whenever I pop a switch on. I try to re-flash my chip w/X2BM, but I get Man Cod 00 and Dev Code 00, or F0, f10, f0, f0, all kinda problems with it never can get 01 and 01, not on my XBox or my buddys. I have my XBox listed below..any help you can give me is greatly appreciated, your chat room was the only was Ive been able to get help on ANYTHING with, but, no ones around this late., so i Figd i post here. Ive already posted a couple other times in other topics about this. Look for the other posts if you want more info.

WHen it comes down to it, this is what i need to do and the problems im having doing it

Sigtoms XBox:
v1.0 x/thomson DVD Drive
yupgraded 120 MB Maxtor HDD ( Slayer Auto Install CD ALREADY INSTALLED W/ALL APPS)
14 games backed up to HDD already
X2 Pro mod chip w/Pogo Pins.
BIOS: None on chip now, been erased or messed up when I switched chip to a friends XBox, cant read anything off the chip thru X2BM. Could the ribbon cable be the problem? I tried my cable and the one that came with my buddys XBOX, still cant re-flash my chip.

Now as I said above, this DID work before i switched chips w/my buddy. I dont care if i need to re-install the whole Slayer CD and all my gazmes, i just need it to work.

Sorry if this is lengthy, just try and give all the info I can. Thanks in advanced.

SigTom

Sorry to hear you are having the problems but the problems you are having are not caused by the installer and unless you formated the HDD in the xbox that was working then the install and the apps are just fine.
The pogo pins adapter for the X2PRO is a sorry ass thing to use but for those who do not wish to solder or can"t then it is an option, with that said if you read the forums for the pogo adapter you will see your not alone. there are many people having the same problem with it aligning right. What i would suggest is you solder in the pin header or have someone do it for you so you can have a stable xbox mod.
the reasons you get the error codes in X2BM is the chip is either not getting power from the motherboard or the ribon cable is installed wrong or pins not aligned right. so what one is it well it could be any one or more causing the problem, if you insist on the pogo adapter then it is a trial and error till you find the correct alignment of it. try and try it again and i am sure you alread have, also use a magnifying glass and look the traces over real good and that the places where the pins touch and the D0 point are clean of varnish and are not damaged. if the holes in the LPC on the MotherBoard are not filled with solder i dought you will ever get it aligned.
Sorry I dont have a quick fix for you except to solder in the header, also the bios you loaded on the chip is probably still in the chip but if it is not aligned right you can read it or boot to it so till you get it aligned right will you find out.

Good Luck you will need it!

SS113

SigTom · « **Reply #257 on:** April 07, 2003, 05:30:00 PM »

SS113;

Thanks you SOO much for giving me a reply. I really do appreciate it. SO far, thats the only real advice Ive been given and explanation as to why what is happeing may be happening. Ill try and re-align the Pogo Pins again, and I will have it soldered, most likely on Wed.

When you say "if you havent formated your HDD" I assume you mean I havent formated it AFTER Ive already installed the 120 GB and Slayer Auto Install CD? If so, the no I havent formated it again, all the games and apps should be on there, thats what I thought , just wanst sure. I almost ended up just shipping my XBox off to a company in Cali tyo fix it for me, but now I will give it the good ol college try one more time. Thanks for you help and encouragement.

SigTom

SS113 · « **Reply #258 on:** April 07, 2003, 05:44:00 PM »

QUOTE (SigTom @ Apr 7 2003, 04:30 PM)

SS113;

Thanks you SOO much for giving me a reply. I really do appreciate it. SO far, thats the only real advice Ive been given and explanation as to why what is happeing may be happening. Ill try and re-align the Pogo Pins again, and I will have it soldered, most likely on Wed.

When you say "if you havent formated your HDD" I assume you mean I havent formated it AFTER Ive already installed the 120 GB and Slayer Auto Install CD? If so, the no I havent formated it again, all the games and apps should be on there, thats what I thought , just wanst sure. I almost ended up just shipping my XBox off to a company in Cali tyo fix it for me, but now I will give it the good ol college try one more time. Thanks for you help and encouragement.

SigTom

Hope all turns out for you and your welcome for the reply.

SS113

RinGz · « **Reply #259 on:** April 08, 2003, 03:35:00 PM »

this saved my ass....completely-i love you forever

Begbie · « **Reply #260 on:** April 08, 2003, 07:30:00 PM »

Does this installer option for having all your dvdx and xboxdash in progressive mode? or should i back up my patched versions and re apply them after upgrade?

SS113 · « **Reply #261 on:** April 09, 2003, 04:47:00 PM »

QUOTE (Begbie @ Apr 8 2003, 06:30 PM)

Does this installer option for having all your dvdx and xboxdash in progressive mode? or should i back up my patched versions and re apply them after upgrade?

There is not an option for progressive mode in the installer you would have to either patch the evox 1.8.3285 that is installed by the installer or FTP you patches to the C: after the install. be careful of the evox.ini as it will be configured for the apps installed so just a heads up.

SS113

R0GER_M007RE · « **Reply #262 on:** April 10, 2003, 08:27:00 AM »

R0GER_M007RE · « **Reply #263 on:** April 10, 2003, 12:56:00 PM »

SS113 · « **Reply #264 on:** April 13, 2003, 09:36:00 AM »

QUOTE (gazdad @ Apr 13 2003, 08:13 AM)

Hello. I think i screwed up my xbox. When turning on I get a error 13. I think i deleted the evoxdashboard. any help will do. Thanks from a noob loser

I am going to guess you used the NEW! SlaYer's EvoX Auto-Installer v2.0 on your xbox and if this is the case there is an option to install evox, this will not format the hdd or delete anything. the options are 5) or 6) chose the one to fit you setup. this will install the evox and apps again. this should fix your problem and allow you to use the xbox as it was before you deleted the files that are causing the errors now.

SS113

SlaYer · « **Reply #265 on:** April 13, 2003, 02:23:00 PM »

SEE NEWSFLASH!

sp44 · « **Reply #266 on:** April 13, 2003, 10:07:00 PM »

Hi, I just installed Slayer's 2.0. I hit rebuild hard drive (3-1) and now when the X-box boots up I get an error 13 "needs service".
I had the drive in my pc before putting it into the X-box. Could that be why? I'm using the Matrix EVO-X 2.6 v1.0. Thanks

slipnot · « **Reply #267 on:** April 14, 2003, 04:08:00 PM »

To your health!

SlaYer · « **Reply #268 on:** April 14, 2003, 11:51:00 PM »

QUOTE (sp44 @ Apr 14 2003, 05:07 AM)

Hi, I just installed Slayer's 2.0. I hit rebuild hard drive (3-1) and now when the X-box boots up I get an error 13 "needs service".
I had the drive in my pc before putting it into the X-box. Could that be why? I'm using the Matrix EVO-X 2.6 v1.0. Thanks

If you would have bothered to read the included documentation this would be a lot easier on everyone...

Quote from the included "Slayer's EvoX Auto-Installer v2.0.nfo" :

"
Error13: If you get error 13 while booting the retail bios
(dual mode mod chip or BioXX), you can use option (11-1)
"PATCH C: FOR Pre-XBOX LIVE / RETAIL BOOT" to make the
"xboxdash.xbe" the M$ dash instead of EvoX since the retail
bios expects to boot from the M$ xboxdash.xbe

"
Hence it's a bios default dashboard lookup problem, Update your bios!!!!

SlaYer · « **Reply #269 on:** April 14, 2003, 11:53:00 PM »

QUOTE (slipnot @ Apr 14 2003, 11:08 PM)

I just wanted to say thank you very much for all your hard work. I recently got my xbox up and running with minimal hitches. the only thing I had a problem with was getting my xbox to boot in the retail / x2 off mode and I found that answer posted here 4 seperate times from both 1wolf1 and ss113.

Thanks for taking 99.999% of the guesswork out of this for a newbie who wants to backup the occasional game.

To your health!

You're most welcome!

I love people who actually put in the effort to read this forum and documentation rather than just ask questions already covered here.

Enjoy it in good health and keep an eye out for the new version coming out soon...

Author Topic: NEW! SlaYer's EvoX Auto-Installer V2.0! (Read 768 times)