Topic: NEW! SlaYer's EvoX Auto-Installer V2.0! (Read 753 times)

Ill187 · « **Reply #300 on:** April 26, 2003, 10:33:00 PM »

My thompson drive is a pile of M$hit. With out your disk, walk through, and my buddy's DVD drive I'd have NEVER gotten Evox up and running.Your disk gave me the confidence to get through it. With out the walk through I would'nt have known what to do and would have burnt out my XBOX. Now I can get down to brass tax!
Hey if you visit Tampa Bay, PM and I'll take you to a bucs game(if they're playing) or Bush Gardens!

SS113 · « **Reply #301 on:** April 28, 2003, 06:23:00 PM »

QUOTE (buggs1a @ Apr 28 2003, 06:01 PM)

Slayer 2.1 has a big bug in my opinion. SS113 mentioned it now deletes the MS dash on an upgrade. i had to use slayer 2.0 to re patch in the ms dash. so there should be a 2.1.1 or something. other then this it's an awesome upgrade over 2.0.

In the first place there is NO BUG in the Version 2.1 of the installer. It does not delete any such thing, It does use a different file name then the 2.0 version did and if you and your BIG mouth and know it all attitude would just shut up and listen for once you would not make such an ass out of yourself.

Since you got mouthy in the mIRC and I Kick/Banned you because you would not stop running off at the jaws maybe you can keep it closed long enough to read the rest of this post!

Version 2.1 of the installer uses the default file names use in the new releases instead of the earlier releases. This was done so that if there is another release of the installer Evox and XBMP should not have a path or file name issues.
The file name used now is xboxdash.xbe for the M$ Dash in EvoX and in version 2.0 it was msxboxdash.xbe and this was causing some confusion, only 1 M$ dash file name is now used for both retail M$ Dash and the M$ Dash in EvoX.

Now where your problem all started is because you do not use retail boot and never even checked to see if you Matrix would boot to retail so in the Version 2.0 you never even finished the proper install and so when you installed Version 2.1 over 2.0 it then used the dash you never set up. so where does the bug fall. In my opinion it falls on you.

Once again there is NO Bug in the installer. The XBMP has also been change to meet the defaults now used in all the current releases and this may cause a few problems for a few people but it is not a bug it is a change in the way the installer is built to meet future releases of all apps.

The End

SS113

PuddWakkr · « **Reply #302 on:** April 29, 2003, 08:57:00 AM »

Just wanted to give you my thanx on a fine program. Keep up the good work. You are VERY appreciated.

SS113 · « **Reply #303 on:** April 29, 2003, 04:29:00 PM »

QUOTE (PuddWakkr @ Apr 29 2003, 08:57 AM)

Just wanted to give you my thanx on a fine program. Keep up the good work. You are VERY appreciated.

Thanks and your Welcome and glad you like the installer

Enjoy
SS113

RinGz · « **Reply #304 on:** May 01, 2003, 11:53:00 AM »

My HD died, clock reset, and was lost until i found this. It booted directly from the CD, bypassing the clock check, and let me set up a new hard drive. This litterely saved me from having to buy a new XBox. thank you soooo much

bigjoe2000 · « **Reply #305 on:** May 03, 2003, 09:58:00 AM »

Whoops... looks like it filtered out my forward slashes... but avid readers of this forum will have already realized that.

dr_greenthumb · « **Reply #306 on:** May 13, 2003, 06:10:00 AM »

what more can i say than, this is the all around best 'all in one' tool around.

2nd modded xbox, first time slayer's user. v 2.1 kicks!

nexgenhalo · « **Reply #307 on:** May 13, 2003, 06:34:00 AM »

i downloaded the installer from mirc. burned it to a cd-rw. but it into xbox read it fine. backed up harddrive. then i go to install option (5) then (5-2) it copied all the files, but when i eject the disk then turn it off then on again it goes right to the original m$ dashboard, can someone tell me what is wrong? plz post back, pm me, or email me at [email protected] thnx in advance.

runciter · « **Reply #308 on:** May 13, 2003, 05:09:00 PM »

edit: double post

runciter · « **Reply #309 on:** May 13, 2003, 07:12:00 PM »

QUOTE (nexgenhalo @ May 13 2003, 10:34 AM)

i downloaded the installer from mirc. burned it to a cd-rw. but it into xbox read it fine. backed up harddrive. then i go to install option (5) then (5-2) it copied all the files, but when i eject the disk then turn it off then on again it goes right to the original m$ dashboard, can someone tell me what is wrong? plz post back, pm me, or email me at [email protected] thnx in advance.

Not familiar with step/option 5, 5-2, but are you sure you have the mod chip enabled? If it is disabled, it boots the MS (retail) dash, enabled it will boot evox (assuming xecuter2 and I think matrix)

ToneCapone · « **Reply #310 on:** May 21, 2003, 10:15:00 PM »

two questions

where can i download the latest bios to flash my matrix? could you make it availabe for DL in your mIRC channel?

I currently have xbox live installed on my xbox, and i dont want to lose it. if i install a new hd and use your tool to format large harddrive how can i get my xbox live account on the new drive? Should i back up first, and copy over some files?

shamelessbill · « **Reply #311 on:** May 22, 2003, 03:30:00 AM »

QUOTE (runciter @ May 14 2003, 03:12 AM)

QUOTE (nexgenhalo @ May 13 2003, 10:34 AM)

i downloaded the installer from mirc. burned it to a cd-rw. but it into xbox read it fine. backed up harddrive. then i go to install option (5) then (5-2) it copied all the files, but when i eject the disk then turn it off then on again it goes right to the original m$ dashboard, can someone tell me what is wrong? plz post back, pm me, or email me at [email protected] thnx in advance.

Not familiar with step/option 5, 5-2, but are you sure you have the mod chip enabled? If it is disabled, it boots the MS (retail) dash, enabled it will boot evox (assuming xecuter2 and I think matrix)

Upgrade you mod chip fw to the executer fw. You can do ths w/slayers disc. Problem was solved for me by doing this.
SB

axl___ · « **Reply #312 on:** July 25, 2003, 12:17:00 AM »

hi everyone...

im pretty much a noob when it comes to xbox modding etc... but i try to read as much information as i can get my hands on...

one questionhas been left unanswered for me, even after reading manuals, readmes, and posts in the forum.

the readmes for slayers installer 2.1 suggest that it only (?) works with xboxes 1.1 and 1.0

what about 1.2 and 1.3 boxes? i myself have a 1.3 and i was wondering if i can use the auto installer without messing up my xbox

any replys are appreciated

axl___

SS113 · « **Reply #313 on:** July 25, 2003, 01:34:00 PM »

QUOTE (axl___ @ Jul 25 2003, 12:17 AM)

hi everyone...

im pretty much a noob when it comes to xbox modding etc... but i try to read as much information as i can get my hands on...

one questionhas been left unanswered for me, even after reading manuals, readmes, and posts in the forum.

the readmes for slayers installer 2.1 suggest that it only (?) works with xboxes 1.1 and 1.0

what about 1.2 and 1.3 boxes? i myself have a 1.3 and i was wondering if i can use the auto installer without messing up my xbox

any replys are appreciated

axl___

Yes you can use it on any PAL/NTSC 1.0, 1.1, 1.2, & 1.3.
I strongly suggest you do a backup of the C: and E: before doing any install of anything the 5XXX dash is not available except in a new Xbox so be sure to back it up before adding the evox and apps.

Enjoy

SS113

Also use the 2.1 thread this is for the old 2.0 installer it is in this forum.

wentsen · « **Reply #314 on:** September 10, 2003, 03:54:00 AM »

/edit
..oops wrong topic...
how do i delete this post?

Author Topic: NEW! SlaYer's EvoX Auto-Installer V2.0! (Read 753 times)