Print

[D3AdMan]

Hi I'm kind of a nooB but the ini you posted for large drives didn't find my m$dash so I had to change this....


#AudioPlayer = "c:xboxdash.xbe"
MSDashBoard = "c:xboxdash.xbe"              to this...

#AudioPlayer = "c:msxboxdash.xbe"
MSDashBoard = "c:msxboxdash.xbe"           to get it to work

hope this helps  

[SS113]

QUOTE (D3AdMan @ Apr 1 2003, 08:42 AM)

Hi I'm kind of a nooB but the ini you posted for large drives didn't find my m$dash so I had to change this.... #AudioPlayer = "c:xboxdash.xbe" MSDashBoard = "c:xboxdash.xbe"              to this... #AudioPlayer = "c:msxboxdash.xbe" MSDashBoard = "c:msxboxdash.xbe"           to get it to work hope this helps

Thanks for the info on the ini files i missed that in the edits i will make the changes

SS113

[Psynotic]

im newb so please forgive me. I'm going to get a modchip, hopefully I'll win one from the contest here, anyways I am preparing programs for my xbox and have heard great things of slayer auto install. Im going to get a new HD, so my question is when I get the chip and a new HD all I have to do is swap the hd with the old one, turn my xbox on, and put slayers auto install and it will format, and installed everything for me? Thanks

[SlaYer]

QUOTE (Psynotic @ Apr 3 2003, 04:13 AM)

im newb so please forgive me. I'm going to get a modchip, hopefully I'll win one from the contest here, anyways I am preparing programs for my xbox and have heard great things of slayer auto install. Im going to get a new HD, so my question is when I get the chip and a new HD all I have to do is swap the hd with the old one, turn my xbox on, and put slayers auto install and it will format, and installed everything for me? Thanks

Yes, correct, however you MUST read the 2 information files included in my release and make sure you back up your xbox BEFORE you make and changes or install anything!

Once you boot with my Installer you'll have FTP access to the XBOX because EvoX has built in FTP.  Use that to make a backup of all the data in the C: & E: drives.  Ignore X:, Y: & Z:, they are just for swap data.

Steps:

1) install chip
2) boot SlaYer's
3) backup all data via FTP to your PC
4) replace HD with larger one
5) boot SlaYer's & select "Build Large HD!"

Good luck!

[Donor]

Just wanted to say thanks.  I hope this fixes my error21

[D3AdMan]

  Hey what do u think of the newer nexgen coming out soon?  Maybe that'll be big enuf to upgrade slayers to v. 3?  Sounds pretty cool..maybe a evoX-nexgen hybrid sort of deal??...

I got a question..
When I want to flash my matrix(mode4) using the evox setup by slayers i just goto flash Bios and choose the bios i have in my bios folder on the c: drive correct?  I just want to make sure it's flashing the matrix and not the onboard chip, or it won't hurt it anyways since I didn't solder anything, also correct..?

[SlaYer]

QUOTE (skinnyrat @ Apr 3 2003, 12:45 PM)

nice work slayer,you are the idiots friend,i want to play avi,s and was told to get xbmp 2.3 how do i upgrade it plz,thanks in advance

Thank you.  Very kind!

If you look back a  few pages, SS113 posted a note about it.

Anyway, just like with any program already in the HD, just go to the folder it resides in and replace the files with the ones in the new version.

If you used SlaYer's on a retail HD it's the E: drive, otherwise it's F:

1) Go to the Apps/XBPlayer folder and empty it out.

2) Extract the latest XBMP and copy in that folder.

3) Make sure to find the "official" 2.3 release as the DLL files care not included in the latest CVS builds and you'll need to copy just the "dll" folder from the official 2.3 to complement the latest CVS build.

Best of luck!

SlaYer

[SlaYer]

QUOTE (D3AdMan @ Apr 3 2003, 06:19 PM)

Hey what do u think of the newer nexgen coming out soon?  Maybe that'll be big enuf to upgrade slayers to v. 3?  Sounds pretty cool..maybe a evoX-nexgen hybrid sort of deal??... I got a question.. When I want to flash my matrix(mode4) using the evox setup by slayers i just goto flash Bios and choose the bios i have in my bios folder on the c: drive correct?  I just want to make sure it's flashing the matrix and not the onboard chip, or it won't hurt it anyways since I didn't solder anything, also correct..?

Well, if NexGen does come out and it works I will have an updated release.

As for flashing the Matrix, I am unsure, I do not have or can test on one.  I setup the installer to flash using standard EvoX commands to the TSOP.

Best bet is to go to an EVOX forum and ask the question as it is their program.

If anyone has succesfully accomplished this however please post here to let everyone else know.

Best of Luck!

SlaYer

[Ronbo]

[R0GER_M007RE]

I`ve puted some emu`s in the slayers F: folder and it copies it to the xbox hd when i use the install dvd, but when i load 1 of the emu`s i only see a few roms, like with the Dgen (sega genesis emu) it only sees the Scooby Doo rom, with the Nes rom it only sees about 15roms, while i had about 600 in the folder, and when i installed it, i saw that it was copied to the hd, but when i use flashfxp it showes indeed that every emulator only contains a few roms, except the Snes emulator which works fine and also shows all the roms  

plz help thanks

p.s there was enough HD space on E: left so that couldnt be it.

[SS113]

QUOTE (R0GER_M007RE @ Apr 5 2003, 03:29 AM)

Ok 1 more try, if its spam sorry DuuDs I`ve puted some emu`s in the slayers F: folder and it copies it to the xbox hd when i use the install dvd, but when i load 1 of the emu`s i only see a few roms, like with the Dgen (sega genesis emu) it only sees the Scooby Doo rom, with the Nes rom it only sees about 15roms, while i had about 600 in the folder, and when i installed it, i saw that it was copied to the hd, but when i use flashfxp it showes indeed that every emulator only contains a few roms, except the Snes emulator which works fine and also shows all the roms   plz help thanks p.s there was enough HD space on E: left so that couldnt be it.

Well as for emulators we don't suport them, but i will try to help as much as I can.
The reason some things are not copied from the Installer CD to the HDD can be caused by not using a NEW CD-RW.
The Xbox has little problem reading a NEW first time written CD-RW but once a CD-RW is ereased and reused some of the data
seams to not be coppied during the install, this is also true when using other copy tools for the Xbox.

I recommend that since you say you can see the files in FlashfXP that you use FTP to add the Emu's to the HDD and or the Rom's
to the HDD that are missing, if you're trying to make a installer that will add all the things you have added to it in a one shot tool
then try and burn it to DVD-R or a new CD-RW and see it that works for you. other then that I do not have any suggestions.

Good luck in your ventures

SS113

[R0GER_M007RE]

 

[SS113]

QUOTE (R0GER_M007RE @ Apr 5 2003, 06:32 AM)

Hmm i got it burned on princo 4x dvd-rs and they work good, and i see when installing that it copies it, but when its done, it seems that its not copied, i tried also on a other xbox, and with a new burned dvdr also once with a other brand dvdr, but no succes

I dont know the reason for the files not being copied, since your using DVD-R media then there should be no read problems, with that said it does not answer your question to the problem you are having sorry i can't come up with a better answer except to use FTP to add them to the Xbox HDD.

SS113

[SlaYer]

QUOTE (Ronbo @ Apr 5 2003, 11:11 AM)

Last weekend I installed the X2P in my XBOX. First time that I've ever modded anything and it went perfectly. Flashed it on Wednesday after several failed attempts (kept getting a verify error) and backed my XBOX HD up on Thursday. Put a 120GB HD in on Friday and used Slayers Auto Installer to complete the installation. This is a must have utility for first timers! Without it I would have been lost. Thank you Slayer! RON

You're most welcome!

[SigTom]

HI:

   I came on over to this topic cause I already used the SLayer Auto-Install on my XBox and it worked great.  But, I tried to get my buddys XBox to work, using X2Pro and Pogo Pins, just like mine, and couldnt get the box to pick up Chip when it was Flashed ( by X2BM) no matter what switch combos I used,  always when to M$Dash.  So, being the smarty pants I am, I brought his box ot my hous, popped my chip from my own XBox into his box, still MS Dash, treid to flash his chip from MY XBox, still MS Dash, put my X2 Pro back in my box, and guess what, my chip wont work now, only goes to MS Dash when chip is off, XBox FRAGS whenever I pop a switch on.  I try to re-flash my chip w/X2BM, but I get Man Cod 00 and Dev Code 00, or F0, f10, f0, f0, all kinda problems with it never can get 01 and 01, not on my XBox or my buddys.  I have my XBox listed below..any help you can give me is greatly appreciated, your chat room was the only was Ive been able to get help on ANYTHING with, but, no ones around this late., so i Figd i post here.  Ive already posted a couple other times in other topics about this.  Look for the other posts if you want more info.  

WHen it comes down to it, this is what i need to do and the problems im having doing it

Sigtoms XBox:
v1.0 x/thomson DVD Drive
yupgraded 120 MB Maxtor HDD ( Slayer Auto Install CD ALREADY INSTALLED W/ALL APPS)
14 games backed up to HDD already
X2 Pro mod chip w/Pogo Pins.  
BIOS: None on chip now, been erased or messed up when I switched chip to a friends XBox, cant read anything off the chip thru X2BM. Could the ribbon cable be the problem?  I tried my cable and the one that came with my buddys XBOX, still cant re-flash my chip.


Now as I said above, this DID work before i switched chips w/my buddy.  I dont care if i need to re-install the whole Slayer CD and all my gazmes, i just need it to work.  

Sorry if this is lengthy, just try and give all the info I can.  Thanks in advanced.

SigTom