Gackt, are you using a crossover cable ? Make sure you are.
Then check your network config in your evox.ini file.
It should look like this:
[Network]
SetupNetwork = Yes
StaticIP = Yes
Ip = xxx.xxx.xxx.xxx
Subnetmask = 255.255.255.0
Defaultgateway = xxx.xxx.xxx.xxx
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0
Replace the XXX at the IP line by your xbox IP address (ex. 192.168.0.5).
Replace the XXX at the DefaultGateway line by your PC IP address (ex. 192.168.0.1).
Also, check the back of your XBOX while your PC and XBOX are ON and the cable is connected to both, you should see a red light on the network connector, if there is no light you have a cable problem.
If you're not sure about your cable, and don't know how to make one, go to the hardware store and ask them a crossover cable (RJ45), its really cheap.
Good luck
This post has been edited by iam: Nov 26 2002, 04:22 PM