Topic: Can't Transfer Default.xbe To Xbox (Read 28 times)

cadman · « **on:** August 16, 2002, 08:37:00 AM »

how much space on c:? what program are you using for ftp?

i-ball · « **Reply #1 on:** August 16, 2002, 10:43:00 AM »

Well, there should be more than enough space on c:. I've transferred a file of more than 5mb in size just to test it and it was fine then I just delete the file.

The FTP application I use FlashFXP and WS_Ftp. I'll also try CuteFTP but before that, I'll try a 100mb network card rather than the old 10mb.

tbj · « **Reply #2 on:** August 18, 2002, 05:50:00 AM »

QUOTE (i-ball @ Aug 16 2002, 04:43 PM)

Well, there should be more than enough space on c:. I've transferred a file of more than 5mb in size just to test it and it was fine then I just delete the file.

The FTP application I use FlashFXP and WS_Ftp. I'll also try CuteFTP but before that, I'll try a 100mb network card rather than the old 10mb.

Make sure you only use 1 connection per site in your ftp program settings.
more than 1 concurrent connections at a time makes the system freeze.

Don't know if your using EvoX on HD, I'd recommend that. Running from a CDRW for exmaple can also make the system freeze if difficulty reading from the disc

You can also try setting the watch.

When avail. HD space is low, I have noticed the xbox acting strange.

You can use both 10mbit and 100mbit NIC.

Hope this helps...

i-ball · « **Reply #3 on:** August 19, 2002, 03:47:00 AM »

QUOTE (tbj @ Aug 18 2002, 11:50 AM)

Make sure you only use 1 connection per site in your ftp program settings.
more than 1 concurrent connections at a time makes the system freeze.

Don't know if your using EvoX on HD, I'd recommend that. Running from a CDRW for exmaple can also make the system freeze if difficulty reading from the disc

You can also try setting the watch.

When avail. HD space is low, I have noticed the xbox acting strange.

You can use both 10mbit and 100mbit NIC.

Hope this helps...

How can I set it so that it only uses 1 connection per site?

I can't run EvoX from the HD as this is my main problem, I can't get it on to the hard disk.

What do you mean setting the watch?

Thanks.

i-ball · « **Reply #4 on:** August 23, 2002, 06:29:00 PM »

any ideas on this yet?

i-ball · « **Reply #5 on:** August 30, 2002, 09:31:00 PM »

I have now resolved this problem.

I you have the above problem, you might want to try a different NIC cause that's what I did and it works like a dream.

Author Topic: Can't Transfer Default.xbe To Xbox (Read 28 times)