Topic: Extend The Life Expectance Of Your Modded 1.6 (Read 783 times)

deshman · « **Reply #375 on:** August 01, 2005, 07:27:00 AM »

ok, well i got a new xbox and installed the resistor. Everything looks good and here's hoping that this will fix this box.

UnSaniTiZ · « **Reply #376 on:** November 01, 2005, 04:36:00 PM »

I haven't yet, and don't want to read through the 40 pages of replies, though I might if I can't get an answer soon enough. I did this fix a while ago for my 1.6, and the chip just stopped working now. I can't boot to chip bios. now pretty much I'm sure either my resistor has failed or my chip has failed, but I have no good way to test the resistor. So, if I cut the track to the LFRAME and don't put a resistor in, would my xbox be able to boot the original bios and not the chip bios, or neither the original nor the chip bios?

TIA

-UnSaniTiZ

Chancer · « **Reply #377 on:** November 02, 2005, 03:30:00 AM »

The track should already be cut when you first did the mod Its not the resistor. If the resistor went it would go high in value same as the track just being open ciruit so the Mod chip would be active all the time.
Failure of the resistor in other words would stop the reatil bios working not the chip

mstandlee · « **Reply #378 on:** March 17, 2006, 03:19:00 AM »

Is there a problem with this and the xecuter 3ce?

Should I install the resistor? I have had my xbox since 04 and it hasent had a problem.. Will it? Thanxs in advance..

mstandlee

seriouslysilly · « **Reply #379 on:** March 17, 2006, 06:38:00 AM »

QUOTE(mcpeepants @ Mar 16 2006, 05:45 PM)

Bump, is this still an issue? It's been over a year, has anyone seen this problem that hasn't done the mod to their 1.6?

QUOTE(mstandlee @ Mar 17 2006, 05:26 AM)

Is there a problem with this and the xecuter 3ce?

Should I install the resistor? I have had my xbox since 04 and it hasent had a problem.. Will it? Thanxs in advance..

mstandlee

i, too, was just thinking about this thread a couple of days ago.
I was just curious on how many v1.6 mobo owners have had problems because they didn't do this mod.

MrMajst3r · « **Reply #380 on:** May 02, 2012, 11:49:00 AM »

Yes, I'm lazy, but 43 pages is a lot to reading...

I have 1.6 Xbox and I want to install X3 CE.

Two small questions:

1. Is this modification tested and worth to do?

2. After I cut a track, I solder LFRAME instead of D0 or not? ( http://xbox.bula.nu/...storinstall.jpg )

MrMajst3r · « **Reply #381 on:** May 12, 2012, 06:09:00 AM »

Author Topic: Extend The Life Expectance Of Your Modded 1.6 (Read 783 times)