Topic: Extend The Life Expectance Of Your Modded 1.6 (Read 783 times)

hippo · « **Reply #360 on:** May 30, 2005, 06:16:00 AM »

This makes it look like they are working on it when they already know their method is unfeasable. Note I didn't say impossible. Working on things until they are releasable is a normal thing in the scene but they have to be putting on a show on this one.

Let's pretend we don't care. haha 'pretend'...

zikronix · « **Reply #361 on:** May 30, 2005, 07:51:00 PM »

has any one even bothered attempting to test it. If you can get it to work?

hippo · « **Reply #362 on:** June 01, 2005, 06:06:00 AM »

I think from reading the bug reports and stuff that they are working on a way to do this as they are having some expected problems they would only know of if they tried. So you have to hand it to them that at least they gave it a go.

Their problem is that they are basicly trying to remove tonsils by going in up the anus. If they would switch ends they'd have a better go of it. I suspect they are doing something that takes some advance notice to release from or enable Lframe and they wont find such triggers I DONT THINK they will find something to accomedate their lead time on everthing.

zikronix · « **Reply #363 on:** June 01, 2005, 10:13:00 AM »

well theyve banned me from there forums. I had to create a new account...Fucking Children I tell you Children

zikronix · « **Reply #364 on:** June 01, 2005, 08:17:00 PM »

yep i re registered to see the fourms i couldnt see and found as usual they deleted my post. how nice of them

deshman · « **Reply #365 on:** June 03, 2005, 08:25:00 AM »

my xbox 1.6 has blown up. i have posted on team xecuter's website and they keep DELETING MY POSTS!!!!1 This is a cover up and they DO NOT want the info getting out about their chips. The first chip i got was infact DOA and i got no help for a replacement. I BOUGHT a new chip and it worked fine. Now the box is DEAD. I can't believe this. They have cost me 2 modchips and now a perfectly fine xbox!!!!!!!!!!!!!!11111111

SOMEONE SHOULD POST SOMETHING ON THE MAIN SITE ABOUT TEAMXECUTER AND HOW THEY ARE SCREWING THEIR CUSTOMERS!!!!!!!!!!111

also someone should post something about this v1.6 problem!!!

anyone can contact me at [email protected]

hassan · « **Reply #366 on:** June 03, 2005, 11:27:00 AM »

have you posted this on the xecuter section on this forum? If he deletes your post here aswell, then you have soemthing to complain about to the site admin. Also, if he can't delete your post, mention that they did so on their forums aswell.

FoxRacR17 · « **Reply #367 on:** June 06, 2005, 02:10:00 PM »

So is it true that the duox2 (white) pulses the lframe and i do not have to install the resitor on a 1.6 when using the duox2? Or should i install it just to be safe?

MoorePower · « **Reply #368 on:** June 07, 2005, 10:12:00 AM »

i spent like 1 hour reading this post and every link i see that shows the resistor fix and added does not work it the pic it pulls up does not show a resistor added?

can someone post or send me a link that shows this fix thanks.

MoorePower · « **Reply #369 on:** June 07, 2005, 05:07:00 PM »

just 1 last thing i see a few different resistors to use does it have to be the flate resistor or a normal carbon one will work and whats the specks on the resistor i need to use.

thanks for all your help

MoorePower · « **Reply #370 on:** June 15, 2005, 12:52:00 PM »

I'm sure its your power transistor chip blew on you, i do sell them pm me and we can talk.

jiggysmb · « **Reply #371 on:** June 23, 2005, 04:11:00 PM »

You may just have to swap the 2T resistor with a 2A. You will need to test for continuity.

if you have a multimeter, check the resistors on the motherboard around the video port. If most dont have continuity, then its time for a new mobo.

Did you swap the case recently? If so, check out this link on my site http://www.paintedxbox.com/save1.6.htm

jiggysmb · « **Reply #372 on:** July 05, 2005, 07:47:00 AM »

If you have a reading on the 2T resistor thats not the problem.....

ShadowSparton · « **Reply #373 on:** July 06, 2005, 10:13:00 AM »

Does this apply to the XBIT 1.5 on a 1.6 wire install?

hippo · « **Reply #374 on:** July 06, 2005, 09:02:00 PM »

Yes on Xbit.

Author Topic: Extend The Life Expectance Of Your Modded 1.6 (Read 783 times)