Topic: Cheapmods In The United States -- $12 (Read 378 times)

Def · « **on:** April 14, 2003, 07:19:00 PM »

HERE IS HOW I SETUP MY XBOX TO FLASH CHEAPMODS QUICKLY (takes 10 seconds at most to flash a cheapmod w/ xbox compared to 2 minutes w/ a programmer).

I leave my xbox cover unscrewed and harddrive/dvdrom unscrewed as well. I can just pop them off quickly as so.
user posted image

As you can see I used headers to install the chip. In this picture, I pulled off the chip revealing the 2x6 male headers attached to the LPC.
user posted image

Whenever I want to flash my cheapmod, I just insert the cheapmod onto the male headers as so.
user posted image

I tilt the cheapmod a bit to get contact between the points and the headers. I just flash away and pull the chip out and proceed to the next one. Total time of flashing? At most 10 seconds and I'm also able to boot up the chip to test if it's working.
user posted image

wiseblood · « **Reply #1 on:** April 14, 2003, 07:29:00 PM »

Great pics!

Is that double-sided sticky tape to hold the chip in place on the headers?
Does it keep the points attached to the headers fairly securely?

Def · « **Reply #2 on:** April 14, 2003, 08:25:00 PM »

Double sided tape is mainly there to provide a cushion between the underside of the chip and the traces on the motherboard. Don't really need it at all.

Snorky, you use evolution X dashboard to flash the chip. There's a tutorial on it in the tutorial section of xbox-scene.

Sn0rKy · « **Reply #3 on:** April 14, 2003, 08:30:00 PM »

so in order to use the xbox to flash u need to have a mod chip that is already flashed?

ocool19 · « **Reply #4 on:** April 14, 2003, 08:40:00 PM »

QUOTE (Sn0rKy @ Apr 15 2003, 04:30 AM)

so in order to use the xbox to flash u need to have a mod chip that is already flashed?

what do u think? if he said with evolutionx?

Kickace1616 · « **Reply #5 on:** April 14, 2003, 08:43:00 PM »

nevermind

Def · « **Reply #6 on:** April 14, 2003, 09:44:00 PM »

Yes snorky.

wtaag · « **Reply #7 on:** April 14, 2003, 10:33:00 PM »

You should flash them with the Cromwell bios. I want to buy some.... but I really would like to be able to program them without using another console. What about a cheap programmer? However... preflashed with the linux cromwell bios would be the best option. Also... where are you located? If I buy some from you... I wanna get idea on how long it will take to reach me.

SupeRdUPErBlakE · « **Reply #8 on:** April 15, 2003, 05:50:00 AM »

I see......How do I make header pins? I know theres a tutorial somewhere....

slivoman · « **Reply #9 on:** April 15, 2003, 11:18:00 AM »

QUOTE (SupeRdUPErBlakE @ Apr 15 2003, 06:50 AM)

I see......How do I make header pins? I know theres a tutorial somewhere....

you don't, you buy the pin headers!!

slivoman · « **Reply #10 on:** April 15, 2003, 11:20:00 AM »

Hey Def, got my order in today. As always, fast and reliable!!! I don't care what you do as long the prices keep going down!!

SupeRdUPErBlakE · « **Reply #11 on:** April 15, 2003, 01:57:00 PM »

Where do I buy a headerpin at?

slivoman · « **Reply #12 on:** April 15, 2003, 02:03:00 PM »

QUOTE (SupeRdUPErBlakE @ Apr 15 2003, 02:57 PM)

Where do I buy a headerpin at?

you can buy them here

Do a search man, you'll find everything you need!!!!

Def · « **Reply #13 on:** April 25, 2003, 11:01:00 PM »

sorry i cannot comment on v1.2 since i have no idea. i know the bios still works but the installation points are different.

ih8lag · « **Reply #14 on:** April 26, 2003, 04:35:00 AM »

Def you ar the man less then a week to the east coast and other side of the border. no question def is the man for xbox mod chips

Author Topic: Cheapmods In The United States -- $12 (Read 378 times)