Print

[warpjavier]

Bump

[warpjavier]

Bump

[MODern Chris]

Just wanted to stop by and give warpjavier some good feedback. I sent my broken 360 to him to get the GPU replaced and just got it back today. I've been gaming on it for four hours straight and its been working perfectly. He quickly answered all of my questions and was in communication with me the whole time he had my 360. He was even nice enough to put back the original x-clamps, update my JTAG wiring to aud_clamp, and update my dashboard, all free of charge. If you need to get a console repaired I highly recommend him.

[jleos_101]

I have a xenon jtag that has rrod and doesn't show any error message, it doesn't show anything. Would I need a replacement or just reballled?

This post has been edited by jleos_101: Jul 3 2011, 10:05 PM

[jleos_101]

QUOTE(warpjavier @ Jul 3 2011, 05:35 PM)

If that xbox has never been heatgunned / reflowed, I can reuse the chip, but for a $15 extra you will have peace of mind that the chip I'm using as a replacement is good.

Alrite will it fix it fursure?

[warpjavier]

QUOTE(jleos_101 @ Jul 4 2011, 03:01 AM)

Alrite will it fix it fursure?

Yes, it will.

[jleos_101]

QUOTE(jleos_101 @ Jul 3 2011, 01:43 PM)

I have a xenon jtag that has rrod and doesn't show any error message, it doesn't show anything. Would I need a replacement or just reballled?

If I had two xboxs that need the gpu replaced would it be cheaper?

[warpjavier]

QUOTE(jleos_101 @ Jul 6 2011, 10:13 PM)

If I had two xboxs that need the gpu replaced would it be cheaper?

I can lower the labor $5 each.

[jleos_101]

QUOTE(warpjavier @ Jul 6 2011, 09:09 PM)

I can lower the labor $5 each.

ok sounds good. How much would that be in total?

[fullmetal289]

I have an xbox zephyr and I am just thinking about getting the gpu replaced, but I think it may be more than that.. I'm not sure.

It is jtagged and works fine most of the time when I use it in SD, but when I play in HD the graphics look funny and the colors change on the screen, eventually leading to an E74 with the error code 1022. The mobo has the 12v fan mod already, as well as an xclamp fix on either the CPU or GPU (i forget, most likely on the cpu).

Was wondering what you recommend, because as I said, the errors are inconsistent and mostly only occur when playing in HD video mode. I feel more than replacing the gpu is required, but what do you think?

[warpjavier]

QUOTE(jleos_101 @ Jul 7 2011, 07:38 AM)

ok sounds good. How much would that be in total?

Please, PM me with details about the 2 xboxes so I can give you a quote.

Thanks

QUOTE(fullmetal289 @ Jul 7 2011, 03:56 PM)

I have an xbox zephyr and I am just thinking about getting the gpu replaced, but I think it may be more than that.. I'm not sure.

It is jtagged and works fine most of the time when I use it in SD, but when I play in HD the graphics look funny and the colors change on the screen, eventually leading to an E74 with the error code 1022. The mobo has the 12v fan mod already, as well as an xclamp fix on either the CPU or GPU (i forget, most likely on the cpu).

Was wondering what you recommend, because as I said, the errors are inconsistent and mostly only occur when playing in HD video mode. I feel more than replacing the gpu is required, but what do you think?

Hi,
You definitely need your GPU replaced in that Zephyr.

[fullmetal289]

Ok great. Would you think that to being the only solution needed? Do you have any idea as to why it runs fine on SD but not HD?

If I had the parts mailed to you with my console, would you be able to apply the x-clamp fix after reballing\reflowing\replacing the gpu\hana?

[warpjavier]

QUOTE(fullmetal289 @ Jul 7 2011, 04:35 PM)

Ok great. Would you think that to being the only solution needed? Do you have any idea as to why it runs fine on SD but not HD?

If I had the parts mailed to you with my console, would you be able to apply the x-clamp fix after reballing\reflowing\replacing the gpu\hana?

I can't tell you why it fails only in HD, might be luck that when you tried in SD didn't fail or could be the GPU is not been pushed too hard in SD.
You can send me parts for the x-clamp, but after a successful reball with new GPU, x-clamp fix is not needed. I rather use the original X-clamps.

[fullmetal289]

QUOTE(warpjavier @ Jul 7 2011, 11:58 AM)

I can't tell you why it fails only in HD, might be luck that when you tried in SD didn't fail or could be the GPU is not been pushed too hard in SD.
You can send me parts for the x-clamp, but after a successful reball with new GPU, x-clamp fix is not needed. I rather use the original X-clamps.

Yeah, my personal belief leads me to thinking its not being pushed as hard.. I just didnt know if a seperate chip was used in addition to the gpu when switching to HD..

i figured i would use the xclamp fix afterwards to prevent continual board flexing and future cold solder joints.

personally i dont even know if the gpu is the only problem, the onboard ram goes in excess of 50C when idle, and 60C when playing games... is that normal? seems pretty high.

sorry for the million questions, ive never done this service before, and i dont doubt your ability. i am just concerned with even after doing this, if the problem could ever reoccur.

[warpjavier]

QUOTE(fullmetal289 @ Jul 7 2011, 05:05 PM)

Yeah, my personal belief leads me to thinking its not being pushed as hard.. I just didnt know if a seperate chip was used in addition to the gpu when switching to HD..

i figured i would use the xclamp fix afterwards to prevent continual board flexing and future cold solder joints.

personally i dont even know if the gpu is the only problem, the onboard ram goes in excess of 50C when idle, and 60C when playing games... is that normal? seems pretty high.

sorry for the million questions, ive never done this service before, and i dont doubt your ability. i am just concerned with even after doing this, if the problem could ever reoccur.

50c~60c for the RAM is normal. The problem could re occur after replacing the GPU, as the GPUs I use are the same parts MS use. I give you 3 months warranty for parts and labor.