Topic: Jtagging Service Starting At 20$ (Read 362 times)

WorldFormula · « **Reply #30 on:** July 27, 2010, 08:21:00 PM »

QUOTE(WorldFormula @ Jul 25 2010, 10:06 PM)

For this week only, free ROL mods any color when any 360 is sent to be jtagged!

BUMP!

WorldFormula · « **Reply #31 on:** July 28, 2010, 02:47:00 PM »

BUMP!

WorldFormula · « **Reply #32 on:** July 29, 2010, 05:01:00 PM »

Still free ROL mods this week!

BUMP!

WorldFormula · « **Reply #33 on:** July 30, 2010, 10:04:00 PM »

BUMP!

WorldFormula · « **Reply #34 on:** August 01, 2010, 09:38:00 AM »

ThE MaSTeR 3 · « **Reply #35 on:** August 03, 2010, 09:38:00 AM »

Botched Nand-x install can you fix it?

I badly soldered the 2 nand qsb's and removed one of the pads so I gave up before I did anymore damage. I decided to have a pro installer do it. I also have the 2 jtag qsb's in place but I didnt solder them. So I tried to power the 360 to make sure it still works and I dont get any power at all!

Is this because the nand qsbs are partially soldered still or did I damage the 360 somewhere? Hopefully the nand qsbs just need to be removed to restore the 360 to working condition. I cant seem to desolder the qsbs so I need the advice of an expert.

So would you be able to salvage my mistakes and get my 360 jtag'd? You can keep the extra nand-x crap if you get it jatagged.

ThE MaSTeR 3 · « **Reply #36 on:** August 03, 2010, 10:39:00 AM »

Good news removed the nand qsb's (threw them away they were trashed) and the 360 is working perfectly again. The nand points are still in good shape (might need to clean them up a little) and the jtag points are perfect since I didnt attempt to solder them. In fact I can leave the 2 jtag qsb's in the 360 if you want to use them for the jtag instead of wire install.

WorldFormula · « **Reply #37 on:** August 03, 2010, 12:14:00 PM »

QUOTE(ThE MaSTeR 3 @ Aug 3 2010, 12:39 PM)

Good news removed the nand qsb's (threw them away they were trashed) and the 360 is working perfectly again. The nand points are still in good shape (might need to clean them up a little) and the jtag points are perfect since I didnt attempt to solder them. In fact I can leave the 2 jtag qsb's in the 360 if you want to use them for the jtag instead of wire install.

Hey, glad to hear you got them running again! These 360s can be quite annoying. Good to hear the points are in good shape as well, I can clean them up for ya no problem. I shouldn't need the qsbs though, I'll just do a wire install. I prefer sticking to what I'm used to as it leaves much less room for error. Did you need the keyvaults or not?

Thanks!

ThE MaSTeR 3 · « **Reply #38 on:** August 03, 2010, 03:06:00 PM »

No, it was banned back in 2008

WorldFormula · « **Reply #39 on:** August 03, 2010, 03:20:00 PM »

Alright, sounds good then. I'll PM you my shipping info and we'll go from there.

Thanks!

WorldFormula · « **Reply #40 on:** August 05, 2010, 11:37:00 AM »

BUMP!

WorldFormula · « **Reply #41 on:** August 06, 2010, 04:15:00 PM »

BUMP!

WorldFormula · « **Reply #42 on:** August 09, 2010, 02:19:00 PM »

Thanks, I appreciate it!

I'll be out for this week because of a family emergency, but I'm still taking orders and will begin immediately on any consoles this upcoming Monday.

Thanks!

GISJason · « **Reply #43 on:** August 15, 2010, 10:45:00 AM »

Free Bump!

Very fast turnaround! Had my Falcon jtagged by him!!! Used the latest of everything!

Will for sure be back again!!!

Thanks!!!

WorldFormula · « **Reply #44 on:** August 17, 2010, 11:38:00 PM »

Thanks!!

BUMP!

Author Topic: Jtagging Service Starting At 20$ (Read 362 times)