Print

[imirafuentes]

If I put EvoX in my Xbox using the mechassault hack can I still play burn backup games, or burn games?
Or do I need the chip to do that?
Thanks..

[jesusphreak]

Your HD by default is only 8-10 gb....

That by itself will only let you backup 1 to 2 games...but the system needs most of the storage anyway, so basically, unless you get a new HD....you are out of luck...

However, if you do have or you do get a new HD, if you don't mind doing without XBOX LIVE, then no, you don't need a modchip, but if you do want to play on LIVE, you will need a modchip....

Keep in mind, you cannot play on LIVE using backups...

Good luck!

This post has been edited by jesusphreak: Aug 6 2004, 08:39 PM

[[GD]MOOK]

I have the slayers.exe . An umoded xbox. I also have a moded xbox. I would like to mod my other one without using a chip. In the instruction manual for slayers it say's to make the disc and just put it in and flash your bios but, I read in the forums that you have to flash the bios and use one of the exploits and all this other crap. I have tried just sticking slayers on a dvd-r and sticking it in and all it says is not a xbox disc. I also did the hot swap with the hard drives and tried it again then I get error 14. Do I need to jumper the solder joints? Can anyone tell me do I need to flash my bios before I use slayers at all? If so then the instruction manual should be changed up a bit. I am definitley a noob at this as if you can't tell but I would like to do this the easiest way possible. Please help I have been at this for a couple of days. Reading thru the forums, tutorials and instruction manuals.  

[SBEEZY]

YES SIR TO FLASH YOUR TSOP(IF THATS WHAT U ARE TALKING ABOUT) U DO HAVE TO SOLDER THOSE JUMPERS

[Jason Voorhees]

ive set this to no. just like this (JumpToMsDash    = No). and, my time/date still didnt set itself.

[Urkel]

I read on this forum that evox had their igr option controllerd from the dashboard.
When i looked at my evox.ini i didn't saw this section :

[IGR]

Start_Button    = Yes
Back_Button    = Yes
L_Trig        = Yes
R_Trig        = Yes
White_Button    = No
Black_Button    = No
A_Button    = No
B_Button    = No
X_Button    = No
Y_Button    = No

wich is shown in the tutorial : http://xbox-scene.com/articles/evox-ini.php
Now my question.
If i add this section it means that only this way of igr will work?
Because now i have 2 ways how i can Igr.
The way that is shown above start+back and l+r trigger and the second way l+r trigger and pressing the 2 thumb sticks.
I want that second way disabled.

Thnx already (Y)

/edit:
I have
xbox 1.6
softmod
200 gig hdd
evox m8 bios (i think)

This post has been edited by Urkel: Feb 16 2005, 01:12 AM

[Destroyer 101]

.....       :popcorn:

[Evil Ryu]

Hey heinrich,... can I add a little something here? I've been seeing a few people come across this problem lately.
___________________________________________________

If you're having problems launching a game - where it goes to the EvoX loading screen, and then resets back to the dashboard - try this:

Check your parental settings in the MSDashboard settings menu. Make sure everything is cranked up.

If the settings are too low, it will only allow you to play 'G' rated games (ie - Nemo) and if you try anything above the set level, it will just reboot you back to the dashboard. Another way to check this is to fire up the MSDashboard and then put the game in - odds are that it'll give you an error about the parental settings.

[iXi THOR iXi]

DO YOU NEED A MOD CHIP TO INSTALL EVOX 2.6 WITH A DISK

[gsharpshooter]

alright question on the install games and apps i wanna try and see if it works so where do u put the game itself to back up in ur xbox or computer

[sniperace]

so i have an xbox 2002
cant softmod it with 007 exploit so need to flash it
i think its
solder a couple of points then use the softmod exploit then remove the wire i soldered on then put it back together bingo bango softmoded
please does anyone have a picture or link to a site that shows me where to solder to flash this exploit onto a older xbox
ie befor 04
the one i got to do is 02

[CattyKid]

QUOTE(sniperace @ Sep 10 2005, 05:50 PM)

so i have an xbox 2002
cant softmod it with 007 exploit so need to flash it
i think its
solder a couple of points then use the softmod exploit then remove the wire i soldered on then put it back together bingo bango softmoded
please does anyone have a picture or link to a site that shows me where to solder to flash this exploit onto a older xbox
ie befor 04
the one i got to do is 02

I would suggest trying to use Krayzie's Ndure Installer.  I used Splinter Cell for all my buddies' boxes, as they all (the discs) work.

[Evillvi]

read the setting up evox.ini tut and it says nothing about setting it up to jump to the ms dash from the evox menu. now this is my only problem.once this is taken cared of i'll truly be complete...please somebody help me

[theperfekt001]

If you turn on your system and your Evox menu only has MS Dashboard, Reboot, Settings, Power Off, and Flash BIOS, your evox.ini has been corrupted. All you have to do is FTP a new evox.ini to your evox directory. If you did not make a backup of your evox.ini, an example one can be found in the evox release on Xbins.

If you cannot FTP you can create a boot disc and FTP through that. You could also create a disc that has the new evox.ini file on it that boots to a program with a file manager (such as UnleashX) and copy the file to your Evox directory using the file manager.

This post has been edited by theperfekt001: Nov 3 2006, 11:32 PM

[theperfekt001]

This forum is for general and technical discussion of EvolutionX, the program. This is not the place for softmod questions. For those try the No-Modchip Hacks (exploits) Subforums. Threads related to softmods will be moved, closed, or deleted.

This post has been edited by theperfekt001: Oct 21 2006, 12:38 AM